ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 04-08-2008   #1
lbszr
 
lbszr's Avatar
 
Join Date: Nov 2006
Location: dayton,ohio
Posts: 425
Default Had to try it

Took the B@B resonator off and put in two straight pipes. Had some 3inch pipe so didn't actually cost anything but a lot of work. Also with headers.

All I got to say is Wow, think I've lost some hearing after a two hour drive, resonance didn't seem that bad at the time but it must of caught up with me. Above 2 grand it's not bad though. Just can't cruise.

Guess I'll try the X pipe now but sounds like there's complants out there on that setup also so might be wasting my time again. The resonator chocks down so much can't bring myself to put it back on though.
__________________
[FONT=Comic Sans MS][COLOR=red]"I wanna go fast!!"[/COLOR][/FONT]
[FONT=Comic Sans MS][COLOR=#ff0000]-- Ricky Bobby[/COLOR][/FONT]
lbszr is offline   Reply With Quote
Old 04-08-2008   #2
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Had to try it

Quote:
Originally Posted by lbszr
Took the B@B resonator off and put in two straight pipes. Had some 3inch pipe so didn't actually cost anything but a lot of work. Also with headers.

All I got to say is Wow, think I've lost some hearing after a two hour drive, resonance didn't seem that bad at the time but it must of caught up with me. Above 2 grand it's not bad though. Just can't cruise.

Guess I'll try the X pipe now but sounds like there's complants out there on that setup also so might be wasting my time again. The resonator chocks down so much can't bring myself to put it back on though.

LOL well dont take this the wrong way but "duh" lol. Must have been pretty brutal
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 04-08-2008   #3
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,164
Default Re: Had to try it

try a Xpipe with a pair of Magnaflow Bullet mufflers..

removing the Resonator and replacing with straight pipes or a Xpipe will be louder.. since there is less to muffle the sound
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 04-09-2008   #4
lbszr
 
lbszr's Avatar
 
Join Date: Nov 2006
Location: dayton,ohio
Posts: 425
Default Re: Had to try it

Quote:
Originally Posted by -=Jeff=-
try a Xpipe with a pair of Magnaflow Bullet mufflers..

removing the Resonator and replacing with straight pipes or a Xpipe will be louder.. since there is less to muffle the sound
I'll try the xpipe and does the Magnaflow bullet's have a comparable sound outside the car to the B@B's?

Kinda like the B's sound, actually sounds really good now with resonator removed and not much louder on the outside.
__________________
[FONT=Comic Sans MS][COLOR=red]"I wanna go fast!!"[/COLOR][/FONT]
[FONT=Comic Sans MS][COLOR=#ff0000]-- Ricky Bobby[/COLOR][/FONT]
lbszr is offline   Reply With Quote
Old 04-09-2008   #5
lbszr
 
lbszr's Avatar
 
Join Date: Nov 2006
Location: dayton,ohio
Posts: 425
Default Re: Had to try it

Quote:
Originally Posted by GOLDCYLON
Must have been pretty brutal


Girlfriend verified it was pretty brutal on just a 10 mile trip.
__________________
[FONT=Comic Sans MS][COLOR=red]"I wanna go fast!!"[/COLOR][/FONT]
[FONT=Comic Sans MS][COLOR=#ff0000]-- Ricky Bobby[/COLOR][/FONT]
lbszr is offline   Reply With Quote
Old 04-09-2008   #6
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,164
Default Re: Had to try it

Quote:
Originally Posted by lbszr
I'll try the xpipe and does the Magnaflow bullet's have a comparable sound outside the car to the B@B's?

Kinda like the B's sound, actually sounds really good now with resonator removed and not much louder on the outside.
You I just realized i should expand my previous comments.. run the Xpipe, sfter the X pipe ( before the bends) run a pair of Magnaflow bullets.. then run the B&B Mufflers.. it gives a non neck down solution and the Bullets muffle the sound like the resonator did
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 04-09-2008   #7
lbszr
 
lbszr's Avatar
 
Join Date: Nov 2006
Location: dayton,ohio
Posts: 425
Default Re: Had to try it

Quote:
Originally Posted by -=Jeff=-
You I just realized i should expand my previous comments.. run the Xpipe, sfter the X pipe ( before the bends) run a pair of Magnaflow bullets.. then run the B&B Mufflers.. it gives a non neck down solution and the Bullets muffle the sound like the resonator did
Just looked the bullets up at jegs and that would of looked kind of strange in the back, I'm likin the sounds of this setup, thanks for straightening me out!
__________________
[FONT=Comic Sans MS][COLOR=red]"I wanna go fast!!"[/COLOR][/FONT]
[FONT=Comic Sans MS][COLOR=#ff0000]-- Ricky Bobby[/COLOR][/FONT]
lbszr is offline   Reply With Quote
Old 04-09-2008   #8
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,164
Default Re: Had to try it

Quote:
Originally Posted by lbszr
Just looked the bullets up at jegs and that would of looked kind of strange in the back, I'm likin the sounds of this setup, thanks for straightening me out!
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 04-10-2008   #9
Demps
 
Demps's Avatar
 
Join Date: Jan 2006
Location: Niceville
Posts: 998
Default Re: Had to try it

I have gone back and forth between the x-pipe and resonator (haven't done the pipes) and the x-pipe is brutal on noise. I'll take the x-pipe every time though for the power addition. I don't drive mine cars as a daily driver but for pleasure.
Demps is offline   Reply With Quote
Old 04-10-2008   #10
FU
 
FU's Avatar
 
Join Date: Mar 2004
Location: Found Member
Posts: 4,346
Default Re: Had to try it




What say Sonny ?
__________________
Frank Urbo.

NCM Lifetime member # 982
Registry Founding # 237
FU is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:43 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020