how's best in porting the P. and IH ?! - ZR-1 Net Registry Forums

03-15-2008

how's best in porting the P. and IH ?!

bradslt5 · 03-15-2008

hadi,thats open for a big debate ,corey henderson did mine, amvery happy with the results ,loco bob i believe also does very fine work , very detail oriented. gerg van deventer .good too .then there is mark haibeck who is verywell known and has alot of happy customers . if you can get him to doit pete,is very good has done alot of trials on things insearch of power . he has the most powerfull stk blk 350 without a power adder . i my opinion you cant go wrong with anyone of the above . hope that helps .ps i believe mike ebert does them also and does good work .

03-15-2008

brad, you should choose only one best !

and leave
other to post , you took a big bit from this thread!!

what you left for other?
you are greed

bradslt5 · 03-15-2008

no not greedy just trying to share what i thought about those who did it. some leave the runners seperate and some dont. i dont have enough info to make one the obe whan kinobi

03-15-2008

seperate or spread runners like this one??

tccrab · 03-15-2008

Spread.

T

bradslt5 · 03-15-2008

hadi thats a wishbone, grab each leg spread wide and make a BIG wish. you allways just love to poke alittle fun .hehe

bradslt5 · 03-15-2008

oh by the way hadi . did i ever tell you i love chicken . i wake up every morning with a breast in my mouth and a leg in each hand .it finger lickin good!!!!!!!!!!!!!!!!!

03-15-2008

Quote:

Originally Posted by bradslt5

oh by the way hadi . did i ever tell you i love chicken . i wake up every morning with a breast in my mouth and a leg in each hand .it finger lickin good!!!!!!!!!!!!!!!!!

Locobob · 03-16-2008

Quote:

Originally Posted by HADI-ZR1

seperate or spread runners like this one??

I would port her intake for free!!!

03-15-2008	#1
HADI-ZR1 Guest Posts: n/a	how's best in porting the P. and IH ?! how's best in porting the P. and IH ?!

03-15-2008	#2
bradslt5 Join Date: Oct 2007 Location: lone pine and mammoth lakes ca. Posts: 544	Re: how's best in porting the P. and IH ?! hadi,thats open for a big debate ,corey henderson did mine, amvery happy with the results ,loco bob i believe also does very fine work , very detail oriented. gerg van deventer .good too .then there is mark haibeck who is verywell known and has alot of happy customers . if you can get him to doit pete,is very good has done alot of trials on things insearch of power . he has the most powerfull stk blk 350 without a power adder . i my opinion you cant go wrong with anyone of the above . hope that helps .ps i believe mike ebert does them also and does good work .

03-15-2008	#3
HADI-ZR1 Guest Posts: n/a	Re: how's best in porting the P. and IH ?! brad, you should choose only one best ! and leave other to post , you took a big bit from this thread!! what you left for other? you are greed

03-15-2008	#4
bradslt5 Join Date: Oct 2007 Location: lone pine and mammoth lakes ca. Posts: 544	Re: how's best in porting the P. and IH ?! no not greedy just trying to share what i thought about those who did it. some leave the runners seperate and some dont. i dont have enough info to make one the obe whan kinobi

03-15-2008	#5
HADI-ZR1 Guest Posts: n/a	Re: how's best in porting the P. and IH ?! seperate or spread runners like this one??

03-15-2008	#6
tccrab Join Date: Oct 2004 Location: Folsom CA Posts: 1,653	Re: how's best in porting the P. and IH ?! Spread. T __________________ TomC '90ZR1 #792 Honorary Pirate [B]If it ain't FUN, you're doing something terribly WRONG. [/B]