FS ZR-1 Splash Front plate

[aafc]

Just to let everyone know that I will not be making any more ZR-1 Splash
front plates. I have in stock (11) ZR-1 Splash plate for the 1990 ZR-1 and
(5) ZR-1 Splash plates for the 1991 thru 1995 Each plate cost $85.00 and
shipping is included. You can send me a PM for information on how to order.
Thank you
John
1990 white/black # 2546
one of a few 4l8OE eq ZR=1's

[JT ZR-Won]

Sent ya a PM John

Jay

[mpiecyk]

Hi John,
Do you have any 1995 splash plates left?
Thanks in advance
Mike P.

[aafc]

Hi Mike,
Sorry all sold out.I tried to get premission from GM to sell them,but was
denied.
Now I was thinking what if I made just a blank front plate for 1984
thru 1990 and 1991 thru 1996 and the custormor made a decal of their own
design on the blank front plate. What do you think?
John

[Mikey]

GM can?t stop you from giving them away for free

Side note, I must have gone too fast. Mine caved in a bit and did not hold shape.

[aafc]

Sorry your plate caved in , where did it warp? middle ,side. So far yours is the
first I have heard about. I'am going to check with my supplier about the
material he used to make them. I'll let you know he tells me.
John

[Mikey]

I was surprised John. It seemed thick enough. I will try to take a picture tomorrow. I wonder if the paint affects that plastic and weakened it or if that was not a factor.

[aafc]

Mikey,
I found my old post on the type of plastic used to make the ZR-1 Splash front
plate . Its called EPOXACRYLATE, I do not know if the paint you used effects
the material used to make the ZR-1 splash front plate. I have not gotten an
answer from the manufacturer of the plates.
John

[Mikey]

-Z- is about 1/4 inch concave and -1- is about 1/8 inch concave.
Reflection of my level straight edge in the cover plate above the ZR-1 helps illustrate the curvature.

Single stage body paint plus spray can of clear from auto zone.

[Vetman]

Just sent you a PM.