ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 06-12-2024   #1
chesnut
 
Join Date: Oct 2019
Location: Mansfield, TX
Posts: 148
Default 1992 Upper Radiator Shroud Removal

Help with upper radiator shroud remova;
- all fasteners removed - see attached screenshot

Upper radiator shroud seems stuck to radiator.
When I pry up on driver's side flange with some force, the shroud will raise 1/2 inch, but that's it.

Did I miss some fasteners or ?

Thanks in advance,

Gary
....
Attached Images
File Type: jpg 1992 ZR-1 Upper Radiator Shroud Removal_061224.jpg (43.9 KB, 15 views)
chesnut is offline   Reply With Quote
Old 06-12-2024   #2
Subfixer
 
Subfixer's Avatar
 
Join Date: Sep 2018
Location: Groton, CT
Posts: 382
Default Re: 1992 Upper Radiator Shroud Removal

Did you get the 3 on each side? 8mm head.
Also 2 on each side down by the frame rails.

Sent from my Pixel 4a (5G) using ZR-1 Net Registry mobile app
__________________
1992 ZR1 #442, 2 tops, White, White, Haibeck 415, 3.90 gear, Coilovers
2018 Audi RS5, 2.9 V6 Twin Turbo, Auto, Black, Black
2021 Audi Q3, 2.0T, 8 spd Tiptronic, Navarro Blue metallic, Pearl Beige
Subfixer is offline   Reply With Quote
Old 06-12-2024   #3
chesnut
 
Join Date: Oct 2019
Location: Mansfield, TX
Posts: 148
Default Re: 1992 Upper Radiator Shroud Removal

Subfixer,

Thanks for info.

Just found the drawing that shows 3 on each side - see screenshot.

Question - how in the heck do you get to those? Do you have to take the air pump off on the driver's side?

Thanks,

Gary
....
Attached Images
File Type: jpg 1992 ZR-1 Upper Radiator Shroud Removal_061224_p2.jpg (46.3 KB, 9 views)
chesnut is offline   Reply With Quote
Old 06-12-2024   #4
Subfixer
 
Subfixer's Avatar
 
Join Date: Sep 2018
Location: Groton, CT
Posts: 382
Default Re: 1992 Upper Radiator Shroud Removal

Yes. I had to remove the air pump to get to mine

Sent from my Pixel 4a (5G) using ZR-1 Net Registry mobile app
__________________
1992 ZR1 #442, 2 tops, White, White, Haibeck 415, 3.90 gear, Coilovers
2018 Audi RS5, 2.9 V6 Twin Turbo, Auto, Black, Black
2021 Audi Q3, 2.0T, 8 spd Tiptronic, Navarro Blue metallic, Pearl Beige
Subfixer is offline   Reply With Quote
Old 06-13-2024   #5
chesnut
 
Join Date: Oct 2019
Location: Mansfield, TX
Posts: 148
Default Re: 1992 Upper Radiator Shroud Removal

Subfixer,

Any secret steps/processes to removing the air pump?

Don't have a lift, so I'll have to jack it up and use a jack stand.

Thanks,

Gary
....
chesnut is offline   Reply With Quote
Old 06-13-2024   #6
Subfixer
 
Subfixer's Avatar
 
Join Date: Sep 2018
Location: Groton, CT
Posts: 382
Default Re: 1992 Upper Radiator Shroud Removal

If I remember correctly, it was just a couple of bolts. I disconnected everything from the top. Remove the hoses from the pump. It doesn't need to move far.

Sent from my Pixel 4a (5G) using ZR-1 Net Registry mobile app
__________________
1992 ZR1 #442, 2 tops, White, White, Haibeck 415, 3.90 gear, Coilovers
2018 Audi RS5, 2.9 V6 Twin Turbo, Auto, Black, Black
2021 Audi Q3, 2.0T, 8 spd Tiptronic, Navarro Blue metallic, Pearl Beige
Subfixer is offline   Reply With Quote
Old 06-14-2024   #7
chesnut
 
Join Date: Oct 2019
Location: Mansfield, TX
Posts: 148
Default Re: 1992 Upper Radiator Shroud Removal

Subfixer,

Thanks. Will give it a go.

Gary
....
chesnut is offline   Reply With Quote
Old 06-15-2024   #8
chesnut
 
Join Date: Oct 2019
Location: Mansfield, TX
Posts: 148
Default Re: 1992 Upper Radiator Shroud Removal

Subfixer,

How did you go about getting the 3 8mm screws/bolts out on the passenger side?

Did you use a flexible long extension or ?

Those screws/bolts are very akward for this old man to get to.

Your help is much appreciated. Thanks,

Gary
....
chesnut is offline   Reply With Quote
Old 06-15-2024   #9
Subfixer
 
Subfixer's Avatar
 
Join Date: Sep 2018
Location: Groton, CT
Posts: 382
Default Re: 1992 Upper Radiator Shroud Removal

Yes. Very hard to get them. I used a small 8mm wrench for the ones I couldn't get with a 1/4 " drive ratchet, extension and universal joint.

Sent from my Pixel 4a (5G) using ZR-1 Net Registry mobile app
__________________
1992 ZR1 #442, 2 tops, White, White, Haibeck 415, 3.90 gear, Coilovers
2018 Audi RS5, 2.9 V6 Twin Turbo, Auto, Black, Black
2021 Audi Q3, 2.0T, 8 spd Tiptronic, Navarro Blue metallic, Pearl Beige
Subfixer is offline   Reply With Quote
Old 06-15-2024   #10
Subfixer
 
Subfixer's Avatar
 
Join Date: Sep 2018
Location: Groton, CT
Posts: 382
Default Re: 1992 Upper Radiator Shroud Removal

Once all the bolts are out, the next challenge will be getting it out from under the AC and oil cooler lines.

Sent from my Pixel 4a (5G) using ZR-1 Net Registry mobile app
__________________
1992 ZR1 #442, 2 tops, White, White, Haibeck 415, 3.90 gear, Coilovers
2018 Audi RS5, 2.9 V6 Twin Turbo, Auto, Black, Black
2021 Audi Q3, 2.0T, 8 spd Tiptronic, Navarro Blue metallic, Pearl Beige
Subfixer is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:15 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020