ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 08-20-2014   #1
gen2rt
 
Join Date: Oct 2010
Location: NV
Posts: 38
Default Bad injectors or vacuum leak?

I have a 1994, 19,000 miles, haibeck intake & port polish, headers.
Car suddenly has no bottom end, meaning bad stumble/dies at idle, when I get into it everything is fine. Since the car sits a lot my initial thought was bad primary injector(s). After searching forum, vacuum leak also looks to be a possibility. Looking for input from anyone experiencing something similar.

Thanks,
Jack
gen2rt is offline   Reply With Quote
Old 08-20-2014   #2
Kevin
 
Kevin's Avatar
 
Join Date: Jun 2005
Location: pittsburgh
Posts: 4,632
Default Re: Bad injectors or vacuum leak?

with the miles I'm going to say injectors. a vac leak will cause the car to fall flat high in the rpm band
__________________
It's not the car, it's the people - Doug Johnson
90 r/r "KEYS ON" nick named "T.L.B"
Kevin is offline   Reply With Quote
Old 08-20-2014   #3
LGAFF
 
LGAFF's Avatar
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
Default Re: Bad injectors or vacuum leak?

make sure your MAP sensors are connected
__________________
LGAFF
90 #966-150K miles-sold
92 #234-sold
1987 Callaway TT #17
1991 ZR-1 #1359
LGAFF is offline   Reply With Quote
Old 08-20-2014   #4
Ccmano
 
Ccmano's Avatar
 
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
Default Re: Bad injectors or vacuum leak?

Quote:
Originally Posted by LGAFF View Post
make sure your MAP sensors are connected
I'm with Lee... fuel pump possible too. My money is on the MAP sensor tho.
H
__________________
90'ZR-1 #1461 Red/Black
Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold
08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold
05 C6 Z51 Red/Black Sold
90'ZR-1 #1723 Black/Gray Sold but not forgotten
91' Z51 L98 White Vert. My First, you always remember your first. Sold.
Ccmano is offline   Reply With Quote
Old 08-20-2014   #5
LGAFF
 
LGAFF's Avatar
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
Default Re: Bad injectors or vacuum leak?

I was having an issue at cruise......had rotted rubber on the MAP sensor that was not visible until close inspection....Fuel Pressure Regulator too
__________________
LGAFF
90 #966-150K miles-sold
92 #234-sold
1987 Callaway TT #17
1991 ZR-1 #1359
LGAFF is offline   Reply With Quote
Old 08-20-2014   #6
Demps
 
Demps's Avatar
 
Join Date: Jan 2006
Location: Niceville
Posts: 997
Default Re: Bad injectors or vacuum leak?

Jack,
Where are you located?
Ted
Demps is offline   Reply With Quote
Old 08-20-2014   #7
tccrab
 
tccrab's Avatar
 
Join Date: Oct 2004
Location: Folsom CA
Posts: 1,649
Default Re: Bad injectors or vacuum leak?

Map sensor hose is first guess.
Does it smoke on startup?
Second guess is fueling, either fuel pumps or filter.

Since it's a '94, injectors aren't as likely to be at fault as if it were a '90 or '91.

'Crabs
__________________
TomC
'90ZR1 #792
Honorary Pirate


[B]If it ain't FUN, you're doing something terribly WRONG.
[/B]

Last edited by tccrab; 08-20-2014 at 06:03 PM.
tccrab is offline   Reply With Quote
Old 08-21-2014   #8
gen2rt
 
Join Date: Oct 2010
Location: NV
Posts: 38
Default Re: Bad injectors or vacuum leak?

Thanks for the responses. I'll try the MAP sensor hose/connections. The ZR is parked in Colorado, I mostly live in Reno though. I'll hold off ordering new injectors and will dig into the MAP sensors when I get back to CO (in a couple months). I hope that's what it is, would rather not get into a plenum pull if I don't need to.
If the MAP sensor is ruled out, I'll start looking at the other suggestions.
I'll post back here what I find for reference.

Jack
__________________
Reno, NV
gen2rt is offline   Reply With Quote
Old 08-21-2014   #9
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,697
Default Re: Bad injectors or vacuum leak?

Quote:
Originally Posted by gen2rt View Post
Thanks for the responses. I'll try the MAP sensor hose/connections. The ZR is parked in Colorado, I mostly live in Reno though. I'll hold off ordering new injectors and will dig into the MAP sensors when I get back to CO (in a couple months). I hope that's what it is, would rather not get into a plenum pull if I don't need to.
If the MAP sensor is ruled out, I'll start looking at the other suggestions.
I'll post back here what I find for reference.

Jack
Jack,

I'll be in Denver next weekend. Where is it in CO. Darby and I can check it out.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is offline   Reply With Quote
Old 08-23-2014   #10
gen2rt
 
Join Date: Oct 2010
Location: NV
Posts: 38
Default Re: Bad injectors or vacuum leak?

Xfire,

PM sent.

thanks,
Jack
__________________
Reno, NV
gen2rt is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:01 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020