![]() |
#1 |
![]() Join Date: May 2022
Location: Georgia
Posts: 76
|
![]()
Can anyone recommend the best replacement front 3 pcs black plastic front air dam that most matches the original OEM one. Mine is original and very scuffed up.
Looking to buy a new one, and there are many out there. But wanted recommendations from people who know the best one to get thats closest to OEM Thanks Bob 93 ZR1. |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Jul 2016
Location: Harrodsburg, KY
Posts: 405
|
![]()
I've purchased three complete NOS sets over the last year on ebabe. If NCRS is in yur future, make sure you get the original, assembly line part numbers. Otherwise, repop is the way to go.
|
![]() |
![]() |
![]() |
#3 | |
![]() Join Date: May 2022
Location: Georgia
Posts: 76
|
![]() Quote:
Thank You anyways |
|
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Jul 2016
Location: Harrodsburg, KY
Posts: 405
|
![]()
Mid-America sells a three piece unit that appears like original in config...until you find a NOS set.
|
![]() |
![]() |
![]() |
#5 |
![]() Join Date: Jan 2010
Location: Mystic CT
Posts: 2,620
|
![]()
Mine came from Corvette America @ Carlisle.
Very reasonable $. Believe it or not, the quality is better than OEM... NCRS probably wouldn't agree? |
![]() |
![]() |
![]() |
#6 | |
![]() ![]() ![]() Join Date: May 2007
Location: Peoria, AZ
Posts: 9,154
|
![]() Quote:
![]()
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director ![]() 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
![]() |
![]() |
![]() |
#7 |
![]() Join Date: Sep 2008
Location: Mullica Hill, New Jersey
Posts: 2,576
|
![]()
If your existing factory pieces are all scraped on the bottom edge, simply remove them and carefully file down the edge evenly far enough to remove most if not all of the damage.
While it may not be perfect it retains originality if NCRS pursuits should beckon. Should they notice during judging, you might have a small deduction for condition, but far better than losing all of the points due to non originality. You may also install the repro for use other than NCRS, and re-install the smoothed out one for judging. There are many products out there that will restore the color and low sheen close to original. ![]() Marty |
![]() |
![]() |
![]() |
#8 |
![]() Join Date: May 2022
Location: Georgia
Posts: 76
|
![]()
Done all that ...and there are scrapes on the face that wont come off or restore.
All damage done by previous owner and Im experienced enough and care enough to not ever scrape a new one or NOS one.. Just want the recommended closest repro one to oem and if I can get a NOS I would preferer that Thanks All |
![]() |
![]() |
![]() |
#9 |
![]() Join Date: Apr 2007
Location: Northern VA
Posts: 2,653
|
![]()
Over the years I seen several reproductions that were near perfect knockoffs of originals even including the molded in numbers lettering on the backside. I'll look around at Carlisle next week.Image1660829392.952180.jpg
Sent from my iPhone using ZR-1 Net Registry
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
![]() |
![]() |
![]() |
#10 |
![]() Join Date: Dec 2005
Location: Delanson, NY
Posts: 911
|
![]()
I have both the left and the right side NOS air deflectors, still have the GM parts tags attached. I do not have the center section. I think I paid $55.00 each for them. I'm thinking $110.00 for both plus insured trackable shipping. Payment by PayPal friends and family. If you want photos, I'll have to take them and post them.
I have an aftermarket set of the 3 parts, if you want those $60.00 plus insured trackable shipping.
__________________
1968 convertible Lemans Blue, 1986 coupe Medium Blue NCRS Top Flight (sold), 1990 ZR1 #2529 Red NCRS Regional and National Top Flight (sold), 1990 ZR1 #2124 Charcoal Metallic NCRS Top Flight 2010 & 2018, 2003 Anniversary Red Convertible (sold) Last edited by jrd1990zr1; 08-26-2022 at 03:27 PM. |
![]() |
![]() |
![]() |
|
|