Sway Bar End Link Removal - ZR-1 Net Registry Forums

Black Red '90 · 06-25-2020

When removing the sway bar end links, should the suspension be under load? I have the car supported on a Quickjack lift. When disconnecting the LR end link I heard a loud "pop" when I loosened the lower bolt. Almost like something was shifting under tension. The pop was not from the bolt breaking as it tightened back up fine.

Thanks

Jagdpanzer · 06-25-2020

Both wheels should be off the ground so the sway bar is unloaded.

Sent from my iPhone using ZR-1 Net Registry

Black Red '90 · 06-25-2020

Thanks. That's what I figured. Both wheels are off the ground/off the car so the sway bar should be in a state of rest with zero load on either side.

06-25-2020	#1
Black Red '90 Join Date: May 2018 Location: Virginia Posts: 79	Sway Bar End Link Removal When removing the sway bar end links, should the suspension be under load? I have the car supported on a Quickjack lift. When disconnecting the LR end link I heard a loud "pop" when I loosened the lower bolt. Almost like something was shifting under tension. The pop was not from the bolt breaking as it tightened back up fine. Thanks

06-25-2020	#2
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,650	Re: Sway Bar End Link Removal Both wheels should be off the ground so the sway bar is unloaded. Sent from my iPhone using ZR-1 Net Registry __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake

06-25-2020	#3
Black Red '90 Join Date: May 2018 Location: Virginia Posts: 79	Re: Sway Bar End Link Removal Thanks. That's what I figured. Both wheels are off the ground/off the car so the sway bar should be in a state of rest with zero load on either side.