![]() |
#1 |
Join Date: Dec 2012
Location: NC
Posts: 1,786
|
![]() ![]() What are the options here? Lag screw? Open a keyhole saw access hole in the side, to hold a nut? (the latter has little appeal, for more reasons than just one). In theory, a perfectly round hole doesn't weaken the material, but in practice, well ... practice and theory sometimes don't go one hand in the other... Ideas here?
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Apr 2004
Location: ATL. GA.
Posts: 2,168
|
![]()
See if you can find a nutsert that will fit the hole. Many options.
http://avdelusallc.com/products/nutsert.shtml https://www.google.com/#q=nutsert
__________________
Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold |
![]() |
![]() |
![]() |
#3 |
Join Date: Dec 2012
Location: NC
Posts: 1,786
|
![]()
Nut insert would probably work there Steve, but the reeding might not get THIS job done...
I'm already on it here. Y'all gettin' ready to see some brains in action ![]() ![]()
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] Last edited by Schrade; 09-24-2014 at 12:59 PM. |
![]() |
![]() |
![]() |
#4 |
Join Date: Dec 2012
Location: NC
Posts: 1,786
|
![]()
Wire...
30 lb fishing line
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] |
![]() |
![]() |
![]() |
#5 |
Join Date: Dec 2012
Location: NC
Posts: 1,786
|
![]()
Oh yeah - you squared out the hole, with a 3-sided file / rasp. Never mind that it's not square - THAT works out even better, as you'll see below here.
...to put in a carriage bolt: ![]() ...before you pulled it through Then get a nut on it, and run the nut down to lock the square into the [out-of-perfect] square hole. ![]()
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] Last edited by Schrade; 09-24-2014 at 01:06 PM. |
![]() |
![]() |
![]() |
#6 |
![]() Join Date: May 2013
Location: Beaver, PA
Posts: 516
|
![]()
American ingenuity at work.
![]() |
![]() |
![]() |
![]() |
#7 |
![]() Join Date: Apr 2004
Location: ATL. GA.
Posts: 2,168
|
![]()
Now that's a very inventive fix.
__________________
Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold |
![]() |
![]() |
![]() |
|
|