ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > Corvette > Corvette Technical Questions

Reply
 
Thread Tools Display Modes
Old 02-27-2019   #1
Reichert
 
Join Date: Feb 2018
Location: Austin, TX
Posts: 104
Default Oh no! No start

I'm sitting here in a parking lot, with the dreaded no start condition. Been starting and stopping a few times this evening without trouble. Now, nothing. *Sigh*

From reading about this previously I don't recall any quick fixes, unless I missed something. I might have enough incline and room in front of me to clutch start it if I have to.

-Stephen 1990 #2288
__________________
-Stephen
1990 #2288
Reichert is offline   Reply With Quote
Old 02-27-2019   #2
Reichert
 
Join Date: Feb 2018
Location: Austin, TX
Posts: 104
Default Re: Oh no! No start

Killed half an hour at a bar nearby .. came back and it cranked right up!

-Stephen 1990 #2288
__________________
-Stephen
1990 #2288
Reichert is offline   Reply With Quote
Old 02-28-2019   #3
lfalzarano
 
Join Date: Feb 2011
Location: Clayton, North Carolina
Posts: 1,133
Default Re: Oh no! No start

Sounds like you really weren’t inconvenienced! [emoji482]


Sent from my iPhone using ZR-1 Net Registry
__________________
Lou[COLOR="Red"][B][SIZE="4"][/SIZE][/B][/COLOR]
lfalzarano is offline   Reply With Quote
Old 02-28-2019   #4
lfalzarano
 
Join Date: Feb 2011
Location: Clayton, North Carolina
Posts: 1,133
Default Re: Oh no! No start

What was the temperature that day?


Sent from my iPhone using ZR-1 Net Registry
__________________
Lou[COLOR="Red"][B][SIZE="4"][/SIZE][/B][/COLOR]
lfalzarano is offline   Reply With Quote
Old 02-28-2019   #5
Reichert
 
Join Date: Feb 2018
Location: Austin, TX
Posts: 104
Default Re: Oh no! No start

It was in the mid-60's. I had been driving quite a bit so the car was hot.

Spent some time digging back through the forums on this issue, and I think this thread is probably the most informative overall, including links to other threads.

http://www.zr1.net/forum/showthread.php?t=11727

I will be installing a starter relay as described very soon.
__________________
-Stephen
1990 #2288
Reichert is offline   Reply With Quote
Old 02-28-2019   #6
RussMcB
 
Join Date: Jan 2015
Location: Marietta, GA USA
Posts: 1,160
Default Re: Oh no! No start

It's been a while since I went through that. I think the final correction was the "Purple wire mod", which sends a stronger signal directly to the starter. When I did that mod, I also added a terminal to make it easy to zap the starter directly from the battery's positive terminal, but I haven't had to use it.

That was five years ago. I think there has been once or twice it didn't start immediately (of hundreds of starts),, but it always started after a minute or so.

Maybe the best plan is to turn off the car only when near a bar.
RussMcB is offline   Reply With Quote
Old 02-28-2019   #7
Reichert
 
Join Date: Feb 2018
Location: Austin, TX
Posts: 104
Default Re: Oh no! No start

Yeah, maybe it's a feature, not a bug!

-Stephen 1990 #2288
__________________
-Stephen
1990 #2288
Reichert is offline   Reply With Quote
Old 03-06-2019   #8
Reichert
 
Join Date: Feb 2018
Location: Austin, TX
Posts: 104
Default Re: Oh no! No start

So I added the relay to the circuit, which worked .. briefly. After a relatively short drive (but up to operating temp) it's not starting again. So now I'm thinking the starter solenoid itself is the problem? Hopefully it will start again after a short cool down. No bar in sight this time unfortunately!

-Stephen 1990 #2288
__________________
-Stephen
1990 #2288
Reichert is offline   Reply With Quote
Old 03-06-2019   #9
RussMcB
 
Join Date: Jan 2015
Location: Marietta, GA USA
Posts: 1,160
Default Re: Oh no! No start

OK, two suggestions: 1) Maybe carry a cooler. :-)

2) (Forgive me if I mentioned this before) - Make up a short (2') wire, about 10-12 ga., and make it so you can touch one end of it to the battery positive terminal, sending 12v directly to the starter. I think one of your wires from the relay goes straight to the starter, right? (the purple wire?).

This 'emergency' procedure bypasses everything - Ignition switch, VATS, clutch switch, ...

Important note: Make sure the car is in neutral ! ! !
RussMcB is offline   Reply With Quote
Old 03-06-2019   #10
Reichert
 
Join Date: Feb 2018
Location: Austin, TX
Posts: 104
Default Re: Oh no! No start

Quote:
Originally Posted by RussMcB View Post
OK, two suggestions: 1) Maybe carry a cooler. :-)

2) (Forgive me if I mentioned this before) - Make up a short (2') wire, about 10-12 ga., and make it so you can touch one end of it to the battery positive terminal, sending 12v directly to the starter. I think one of your wires from the relay goes straight to the starter, right? (the purple wire?).

This 'emergency' procedure bypasses everything - Ignition switch, VATS, clutch switch, ...

Important note: Make sure the car is in neutral ! ! !
I did try to jump it with a piece of 12 gauge wire, though I did so at the relay terminal with a short wire, not from the battery directly, which is functionally equivalent I think. I made a few sparks but got nothing from the starter.

-Stephen

-Stephen 1990 #2288
__________________
-Stephen
1990 #2288
Reichert is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:51 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020