ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > Club Regional Areas > Mid-Atlantic Region

Reply
 
Thread Tools Display Modes
Old 03-11-2019   #1
secondchance
 
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,722
Default LED conversion

Hey WAZOO!

For WAZOO guys I thought I would share what I learned for updating our exterior lighting and also offer my service to convert all exterior lighting.

CHMSL mod to LED can be done with no other modification:
https://www.ebay.com/itm/New-Rear-3r...72.m2749.l2649

Tail light conversion requires electronic flasher and I strongly recommend Sylvania ZEVO red LED. This LED will not create a hot spot in the middle of the tail light lens:
https://www.ebay.com/itm/2-Prong-Ele...rd!22102!US!-1

https://www.ebay.com/itm/Sylvania-Ze...ss!22102!US!-1

Front turn signal:
https://www.ebay.com/itm/Sylvania-ZE...ss!22102!US!-1

Front turn signal side light and rear quarter backup lights (both in clear lens):
https://www.ebay.com/itm/2X-1156-301...AAAOSweVNbYrue

Rear Back up lights (flanking license plate):
https://www.ebay.com/itm/2X-1156-301...AAAOSweVNbYrue

If interested pick up parts you need and I will install for you.

Tail lights do not require modification to light bulb sockets.
Other locations require touching up of bulb socket outer edge with Dremel. If perfect NCRS is you thing, I recommend tail lights only!

Last edited by secondchance; 03-11-2019 at 01:13 PM.
secondchance is offline   Reply With Quote
Old 03-15-2019   #2
RICKYRJ1
 
RICKYRJ1's Avatar
 
Join Date: Dec 2005
Location: Tinton Falls, NJ
Posts: 1,177
Default Re: LED conversion

Thank You Sir, going to muster up all the lights your list
RICKYRJ1 is online now   Reply With Quote
Old 03-22-2019   #3
secondchance
 
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,722
Default Re: LED conversion

Quote:
Originally Posted by RICKYRJ1 View Post
Thank You Sir, going to muster up all the lights your list
Hope it’s not too late. I’m having some issue with front turn signal. Hold off front turn signal until I sort it out. Rear, chmsl, front side and back ups, no problem.
secondchance is offline   Reply With Quote
Old 03-22-2019   #4
RICKYRJ1
 
RICKYRJ1's Avatar
 
Join Date: Dec 2005
Location: Tinton Falls, NJ
Posts: 1,177
Default Re: LED conversion

no problem keep me posted thank you for the update
RICKYRJ1 is online now   Reply With Quote
Old 03-28-2019   #5
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
Default Re: LED conversion

Quote:
Originally Posted by secondchance View Post
Hope it’s not too late. I’m having some issue with front turn signal. Hold off front turn signal until I sort it out. Rear, chmsl, front side and back ups, no problem.
what issues are you having?
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 04-01-2019   #6
secondchance
 
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,722
Default Re: LED conversion

Quote:
Originally Posted by -=Jeff=- View Post
what issues are you having?
LED turn signal is making the turn signal blink too slow. My guess is adding resistor may solve the problem but trying to avoid wiring mod. I looked for amber LED 1157 canbus error free but the towers look too big to fit the socket.
secondchance is offline   Reply With Quote
Old 04-01-2019   #7
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
Default Re: LED conversion

Question,

with the signal on, does the side marker flash? then with parking lights on does the side marker flash?
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 04-01-2019   #8
secondchance
 
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,722
Default Re: LED conversion

Quote:
Originally Posted by -=Jeff=- View Post
Question,

with the signal on, does the side marker flash? then with parking lights on does the side marker flash?
Funny you should mention this. Side marker is also problematic. I can get LED T5 to work for front side marker if I am using conventional turn signal bulb. However, with LED turn signal, I can't get LED side marker to work.
For now, I am running conventional front turn signal and side markers up front. I have side tracked to 200 amp alternator project at the moment.
Do you have any wisdom to share for front turn signal LED mod?
secondchance is offline   Reply With Quote
Old 04-01-2019   #9
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
Default Re: LED conversion

Quote:
Originally Posted by secondchance View Post
Funny you should mention this. Side marker is also problematic. I can get LED T5 to work for front side marker if I am using conventional turn signal bulb. However, with LED turn signal, I can't get LED side marker to work.
For now, I am running conventional front turn signal and side markers up front. I have side tracked to 200 amp alternator project at the moment.
Do you have any wisdom to share for front turn signal LED mod?
Wisdom? It won't work.. LOL. I know based on the 1990 FSM, the side marker bulbs run voltages both directions, something LEDs don't do. I have a 1996 FSM I need to check, as I have heard they changed the wiring of the bulbs, but not confirmed.

I built Goldcylon 3 sets of Side marker LED Conversions.. plugs into the harness then into the T5 bulb, so he is running LEDs in the front of the car with no issues.

With the circuits I made GC, they are low current draw with LED but should work with normal lamps (but not recommended).
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 04-02-2019   #10
HAWAIIZR-1
 
HAWAIIZR-1's Avatar
 
Join Date: May 2010
Location: Japan
Posts: 3,581
Default LED conversion

Hey Yun,

I just want to add that I bought everything as you mentioned and all worked fine. I do have Euro lamps so the appropriate bulbs and colors, but same brand.

I ordered these for the front cornering lamps and received them today. They work great and plug right in with no mods.

AMAZENAR 2-Pack 1156 BA15S 1141... https://www.amazon.com/dp/B01N0GP3ZP...p_mob_ap_share

IMG_3563.JPG

Thanks again for the recommendations!!!


Sent from my iPhone using ZR-1 Net Registry
__________________
Craig
"ZR-1 NO KA 'OI"
"ZR-1 ICHIBAN"
1995 #228 Black/Black with Dunn Heads
ZR-1 owner since September 2003
ZR-1 Net Registry Founding Member #0074
NCM Lifetime Member #2048

HAWAIIZR-1 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:13 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020