|
05-05-2012
|
#1 |
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
LGAFF master fabricator...ok thats a stretch
The Siamese plenum I did I picked up from the Phrog man for a good price.....but the MAP senor brackets were hacked off...
 So I figured I would fix it.... Drilled a 6mm hole for stud  Tapped a aluminum spacer from ACE  and alittle JB....  Alittle sanding and it will look stock
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
05-05-2012
|
#2 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,696
|
Re: LGAFF master fabricator...ok thats a stretch
BRILLIANT!
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX |
|
|
|
|
05-05-2012
|
#3 |
  
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
Re: LGAFF master fabricator...ok thats a stretch
It's nice being able to do your own work. Feels good, too.
Good job.
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
|
|
|
|
05-05-2012
|
#4 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: LGAFF master fabricator...ok thats a stretch
 Good enough
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
|
05-05-2012
|
#5 |
|
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,828
|
Re: LGAFF master fabricator...ok thats a stretch
Looks like it'll do the job.
__________________
2004 Z06/Z16 LeMans Commemorative Edition 1991 ZR-1 #302 White/Gray (sold) 1991 ZR-1 #1147 Red/Saddle (sold) |
|
|
|
|
05-05-2012
|
#6 |
Join Date: May 2007
Location: Westminster, Maryland
Posts: 3,687
|
Re: LGAFF master fabricator...ok thats a stretch
Nice job Lee.
Jim |
|
|
|
|
05-06-2012
|
#7 |
 
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,645
|
Re: LGAFF master fabricator...ok thats a stretch
Now that's what I'm talkin' about!
 Lee!Yea, it does make you feel good when you can get stuff like that dunn!
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
|
|
|
|
05-06-2012
|
#8 |
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: LGAFF master fabricator...ok thats a stretch
Not half bad, Lee! Course powder coating is out of the question, I suppose. I have some "Alumaweld" and a video that shows just such type of reconstruction of aluminum castings. I've played around with the stuff some, and I'm intrigued by how well it might work in just that kind of application. If that epoxy doesn't work out, give me a call, and lets see if this Alumaweld stuff is all its cracked up to be!
P.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
|
|
|
05-06-2012
|
#9 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: LGAFF master fabricator...ok thats a stretch
Paul this stuff is good to 600 degrees.....so I am not sure that you could not PC....I used Alumiweld to fill my siamese intake......the issue is getting the parent metal hot enough..I waqs successful once.
I was using MAP...I think with an Oxy torch it would work. Also check out muggyweld.com
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
|
05-06-2012
|
#10 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: LGAFF master fabricator...ok thats a stretch
This is the metal putty not the 2 part epoxy....
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
 |
|
|
Linear Mode
