Fuel Sending Unit Chassis side pigtail, Impossible to find! - ZR-1 Net Registry Forums

Flyman 27 · 06-12-2023

As many of you know, I sell upgraded single fuel pump systems for our ZR-1's. I occasionally received requests for the chassis side electrical connector due to corrosion issues.
THAT WAS A CHALLENGE!
After a LOT of time researching (almost 10 hours!), I finally discovered the GM part number for the connector. It's a Weather Pack 4-pin, but has different alignment tabs so it only fits a Corvette Fuel System.
I even located a company in Germany that had an old stash of them. So I ended up with a couple dozzen of them to offer to anyone who is in need.
I made pigtails with proper color coding of 12" wires.
**If you want I could ship you a custom set with just all the electrical pieces if you want to directly connect to your harness & you have the proper crimper tool. Just send me a note when purchasing.

Here is the ad:

NEW Fuel Pump Sending Unit Pigtail CHASSIS SIDE (NOT Pump Side!)! 1989-95 Corvette LT5 ONLY.
NEW! GM Connector, very hard to find, had to get these from Germany!
Terminals rated at 20 Amp.
12 inch, 16 gage wire leads.

https://www.ebay.com/itm/166109066247

Pics are in ebay ad.

Thanks, Dan

AndrewL · 06-14-2023

Just a post to vouch for the quality and prompt postage of these pigtails, I bought one of these off Dan off ebay recently as a spare.

06-12-2023	#1
Flyman 27 Join Date: Apr 2017 Location: Wayne Illinois Posts: 402	Fuel Sending Unit Chassis side pigtail, Impossible to find! As many of you know, I sell upgraded single fuel pump systems for our ZR-1's. I occasionally received requests for the chassis side electrical connector due to corrosion issues. THAT WAS A CHALLENGE! After a LOT of time researching (almost 10 hours!), I finally discovered the GM part number for the connector. It's a Weather Pack 4-pin, but has different alignment tabs so it only fits a Corvette Fuel System. I even located a company in Germany that had an old stash of them. So I ended up with a couple dozzen of them to offer to anyone who is in need. I made pigtails with proper color coding of 12" wires. **If you want I could ship you a custom set with just all the electrical pieces if you want to directly connect to your harness & you have the proper crimper tool. Just send me a note when purchasing. Here is the ad: NEW Fuel Pump Sending Unit Pigtail CHASSIS SIDE (NOT Pump Side!)! 1989-95 Corvette LT5 ONLY. NEW! GM Connector, very hard to find, had to get these from Germany! Terminals rated at 20 Amp. 12 inch, 16 gage wire leads. https://www.ebay.com/itm/166109066247 Pics are in ebay ad. Thanks, Dan __________________ 91-#1935 Black/black & gray, Haibeck 500 Cams by Pete

06-14-2023	#2
AndrewL Join Date: Dec 2020 Location: Sydney, Australia Posts: 86	Re: Fuel Sending Unit Chassis side pigtail, Impossible to find! Just a post to vouch for the quality and prompt postage of these pigtails, I bought one of these off Dan off ebay recently as a spare.