04-23-2020 | #1 |
Join Date: Jan 2006
Location: Decatur, AL
Posts: 1,115
|
Bosch Injectors - Is this correct oring set up?
I have read the threads on injector o'rings, I am replacing the IH O'rings, I have ohm'd these injectors all are good. This is how they came out, is the o'ring set up correctly and properly identified.
__________________
Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454 |
04-23-2020 | #2 |
Join Date: Apr 2020
Location: Ridgecrest ca
Posts: 71
|
Re: Bosch Injectors - Is this correct oring set up?
One thin guy to look for is the spray pattern . My checked out ok till I took off plenum and turned on fuel pump and 2 just sprayed a stream
|
04-23-2020 | #3 |
Join Date: Jan 2006
Location: Decatur, AL
Posts: 1,115
|
Re: Bosch Injectors - Is this correct oring set up?
But do the rings look right for the primary and secondary ?
__________________
Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454 |
04-23-2020 | #4 |
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
|
Re: Bosch Injectors - Is this correct oring set up?
Here is how mine looked on my 90’ when I was running Bosch injectors. I can never remember which was primary and which secondary however only one has the O-ring mounted to the injector. The other has the O’ring mounted in the injector housing.
H
__________________
90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. |
04-23-2020 | #5 |
Join Date: Jan 2006
Location: Decatur, AL
Posts: 1,115
|
Re: Bosch Injectors - Is this correct oring set up?
Set up looks the same, the primary should be on left of your photo with orange tip the on on the right is secondary...right?
__________________
Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454 |
04-23-2020 | #6 |
Join Date: Aug 2005
Location: Northridge, CA
Posts: 1,457
|
Re: Bosch Injectors - Is this correct oring set up?
Free: Thanks, Jerry! Jerry's Gaskets
https://www.jerrysgaskets.com/lower-...llation-guide/ http://www.zr1specialist.com/HAT%20W...eplacement.pdf
__________________
1995 ZR-1 #106 Blk/ Blk Owned by me since 2000. 93K miles, but not on motor :-) Mods the way I want it, Not afraid to drive it! Last edited by tf95ZR1; 04-23-2020 at 11:43 PM. Reason: Wanted 2 |
04-24-2020 | #7 |
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: Bosch Injectors - Is this correct oring set up?
For what it's worth here (maybe) the Accel injectors (part # 150821 @ Summit Racing) which many, many ZR-1s are running on are identical, i,e., they both have provision for an O-ring at the injector tip. However, on the 1990 ZR-1 ONLY, the ridges provided to hold the O-ring on the tip of the primary injector can be ground off @ your discretion. (Theoretically, the ridges left on provide a bit of turbulence in lieu of the injector boss [often removed as part of the full porting of the 1990 IHs] to promote better atomization of the fuel.)
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry Last edited by Paul Workman; 04-24-2020 at 07:34 AM. |
|
|