|
08-03-2014
|
#1 |
|
Join Date: Jun 2009
Location: I live at Devens, one run at a time
Posts: 455
|
FIC stainless injectors - primary vs secondary
OK so I've started the reassembly process and find the secondary injectors don't "snap" into place like the primaries do. I lubed the lower o-ring made concentric circles to get them in place trying not to distort the lower blue o-ring. Problem is they don't feel seated, they just sort of wobble around in there - like the o-ring hasn't reached the bottom lip on the IH.
Normal? Thanks, - Jeff
__________________
[I]91 ZR-1 #1840, autocrossing in SCCA BSP. FIC S/S's DRM chip/Watson/Borla/lid/LW batt&headlights, springs, shocks, pads & lines, quick rack & Turn One, camber brace, 32/22mm sways, A/C halfway deleted 17x11 & 12 CCW's, 315 & 335 Hoosier A6s [/I] |
|
|
|
08-03-2014
|
#2 |
|
Join Date: Jun 2009
Location: I live at Devens, one run at a time
Posts: 455
|
Re: FIC stainless injectors - primary vs secondary
Well I guess that's just how it is - lower/small o-ring doesn't "seat", nothing to see here!
__________________
[I]91 ZR-1 #1840, autocrossing in SCCA BSP. FIC S/S's DRM chip/Watson/Borla/lid/LW batt&headlights, springs, shocks, pads & lines, quick rack & Turn One, camber brace, 32/22mm sways, A/C halfway deleted 17x11 & 12 CCW's, 315 & 335 Hoosier A6s [/I] |
|
|
|
 |
|
|
Linear Mode
