![]() |
#1 |
![]() Join Date: Nov 2013
Location: San Jose, CA
Posts: 132
|
![]()
I just found out my Z is missing an ECM cover (the triangle-ish panel that extends from the ECM and covers the wires). Does anyone have an original/used one for a 1991 Z?
__________________
1991 ZR-1 #405 (white/black with blue pin stripes) |
![]() |
![]() |
![]() |
#2 | |
![]() ![]() Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,791
|
![]() Quote:
Corvette ECM Cover C4
__________________
Left Clickable links ![]() -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS Last edited by Dynomite; 02-11-2014 at 12:28 AM. |
|
![]() |
![]() |
![]() |
#3 | |
![]() Join Date: Nov 2013
Location: San Jose, CA
Posts: 132
|
![]() Quote:
__________________
1991 ZR-1 #405 (white/black with blue pin stripes) |
|
![]() |
![]() |
![]() |
#4 | |
![]() ![]() Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,791
|
![]() Quote:
I am getting to believe they might be rare as I am having a hard time finding them in a search. Carter should cut a nice plate out of Aluminum with some etching on it in red indicating the CHIP that is running ![]() Carter could have some nice Aluminum Pegs that fit around the ECM like the standard bolted to the plate with some nice SS Allen Head Bolts. And under the plate some Velcro like the plastic plate has. And if you are not into "Flash" that Aluminum Plate could be painted a nice Flat Black. And maybe those brackets that hold the plate into position could be designed to "lock" the plate into position so it would NOT fall off under the hood if the Velcro does not do its job. Try this Corvettenutz Or....... Corvettenutz Vette2Vette ebay Justcorvette Justcorvettes
__________________
Left Clickable links ![]() -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS Last edited by Dynomite; 02-11-2014 at 08:11 AM. |
|
![]() |
![]() |
![]() |
#5 | |
![]() ![]() ![]() Join Date: May 2007
Location: Peoria, AZ
Posts: 9,154
|
![]() Quote:
Rare kinda, HTF yes.. Also usally one of the first items to go in a a part out. Along with the Thermostat housing, the ECM and of course the DIS module
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director ![]() 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
![]() |
![]() |
![]() |
#6 |
![]() Join Date: Feb 2011
Location: San Marcos CA
Posts: 1,802
|
![]()
There seems to be two different styles of ecm wire cover. The big one with the velco attachment (that rubs a little on my hood, and the slim one that just covers the harness plugs.
which year is supposed to have what? |
![]() |
![]() |
![]() |
#7 |
![]() Join Date: Oct 2004
Posts: 1,889
|
![]()
'90 & '91 should have the flat "Velcro" secured cover. '92+ should have the conduit type cover that snaps over just the connectors on the rear. A '91 L98 is cataloged by SPO to have the conduit type cover for just the connectors also.
|
![]() |
![]() |
![]() |
#8 | |
![]() Join Date: Nov 2013
Location: San Jose, CA
Posts: 132
|
![]() Quote:
![]()
__________________
1991 ZR-1 #405 (white/black with blue pin stripes) Last edited by Okiedoke; 02-11-2014 at 12:38 PM. |
|
![]() |
![]() |
![]() |
#9 | |
![]() Join Date: Feb 2011
Location: San Marcos CA
Posts: 1,802
|
![]() Quote:
Wow! I bought mine for $40. I just used 3M dual-lock strips that you can buy at target for $3. It is a much stronger velcro style of interlocking tapes. People seem to remove the velcro sometimes. I think my ecm still had the piece on it. My next question is why are so many vettes missing this part? Last edited by mike100; 02-11-2014 at 12:43 PM. |
|
![]() |
![]() |
![]() |
#10 | |
![]() Join Date: Apr 2004
Location: ATL. GA.
Posts: 2,168
|
![]() Quote:
__________________
Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold |
|
![]() |
![]() |
![]() |
|
|