WANTED: Cam position sensor for LT5 - ZR-1 Net Registry Forums

mlubahn · 12-09-2017

Hello. Looking for a camshaft position sensor for my 1990 ZR1. From what I understand, there are a few part numbers: 10096172 and 10137658. Possibly more???? Please let me know if you have one, new or used. THANKS!

Maybe a dual mass flywheel too!!!!

Please let me know if you have either

Young1 · 12-09-2017

I am looking also. All I have found is 239.95 at napa. Whew! Any leads are appreciated.

Ccmano · 12-10-2017

Quote:

Originally Posted by mlubahn

Hello. Looking for a camshaft position sensor for my 1990 ZR1. From what I understand, there are a few part numbers: 10096172 and 10137658. Possibly more???? Please let me know if you have one, new or used. THANKS!

Maybe a dual mass flywheel too!!!!

Please let me know if you have either

PM sent...
H

Young1 · 12-10-2017

Mr. Dynamite. Jerrys link submitted is for a crank sensor. Jerry has no listing for cam sensors. Any other suppliers anyone can share?

WVZR-1 · 12-12-2017

Some potential after-market other than the NAPA selection BUT only for the later 10137658 which is also the NAPA interchange.

WELLS - SU1101

SMP - PC110

AIRTEX - 5S1254

AUTOPART INTERNATIONAL - 1802-302169 (couldn't confirm with an image)

When the GM 10137658 was used to replace the 10096172 there were GM notes that mentioned a different shield GM 10199080 likely required.

10096172 seems to have been used '90 & '91 with the 10137658 potentially in later '92+ builds.

If your '90 is apart it might be interesting to compare the shield differences with snapshots.

Z51JEFF · 12-13-2017

I have an AIRTEX in my car,think it was $200. As stated the original shield won’t work with this part.

Young1 · 12-18-2017

Gentlemen, I am desperate to purchase a camshaft positioning sensor. A month ago napa had five within the country, now they have none. I have used all of the part numbers I have called manufacturers I have spent hours on the Internet and I have come up blank. I waited until I got my bonus last Friday and that was too long. My car backfired coughed stumbled and died in traffic Saturday evening. Started right up after I stopped though. Code 31 once again. Desperate in Florida.

Ccmano · 12-18-2017

I hesitate to say it but White Racing Products in FL. shows one in stock. $296.00

These guys are a craps shoot

http://www.whiteracingproducts.com/i...roducts_id=596

The next site has a listing of dealers that supposedly have them in stock. Good luck!

http://oemcats.com/oem-parts/10137658.html

H

Mystic ZR-1 · 12-18-2017

FWIW: Have your injectors been replaced?
Code 31 was just one of the spurious codes that
showed up when my injectors crapped out...

Jagdpanzer · 12-18-2017

Wonder if there is an alternative sensor out there that could be adapted to work in place of the original OEM cam sensor?

12-09-2017	#1
mlubahn Join Date: Dec 2017 Location: southern california Posts: 1	WANTED: Cam position sensor and Dual mass flywheel for 1990 ZR1 LT5 Hello. Looking for a camshaft position sensor for my 1990 ZR1. From what I understand, there are a few part numbers: 10096172 and 10137658. Possibly more???? Please let me know if you have one, new or used. THANKS! Maybe a dual mass flywheel too!!!! Please let me know if you have either Last edited by mlubahn; 12-09-2017 at 09:22 PM.

12-09-2017	#2
Young1 Join Date: Sep 2016 Location: Ocala, FL Posts: 894	Re: WANTED: Cam position sensor for LT5 I am looking also. All I have found is 239.95 at napa. Whew! Any leads are appreciated.

12-10-2017	#4
Young1 Join Date: Sep 2016 Location: Ocala, FL Posts: 894	Re: WANTED: Cam position sensor for LT5 Mr. Dynamite. Jerrys link submitted is for a crank sensor. Jerry has no listing for cam sensors. Any other suppliers anyone can share?

12-12-2017	#5
WVZR-1 Join Date: Oct 2004 Posts: 1,890	Re: WANTED: Cam position sensor for LT5 Some potential after-market other than the NAPA selection BUT only for the later 10137658 which is also the NAPA interchange. WELLS - SU1101 SMP - PC110 AIRTEX - 5S1254 AUTOPART INTERNATIONAL - 1802-302169 (couldn't confirm with an image) When the GM 10137658 was used to replace the 10096172 there were GM notes that mentioned a different shield GM 10199080 likely required. 10096172 seems to have been used '90 & '91 with the 10137658 potentially in later '92+ builds. If your '90 is apart it might be interesting to compare the shield differences with snapshots.

12-13-2017	#6
Z51JEFF Join Date: Dec 2007 Location: Fremont,Ca Posts: 3,073	Re: WANTED: Cam position sensor for LT5 I have an AIRTEX in my car,think it was $200. As stated the original shield won’t work with this part.

12-18-2017	#7
Young1 Join Date: Sep 2016 Location: Ocala, FL Posts: 894	Re: WANTED: Cam position sensor for LT5 Gentlemen, I am desperate to purchase a camshaft positioning sensor. A month ago napa had five within the country, now they have none. I have used all of the part numbers I have called manufacturers I have spent hours on the Internet and I have come up blank. I waited until I got my bonus last Friday and that was too long. My car backfired coughed stumbled and died in traffic Saturday evening. Started right up after I stopped though. Code 31 once again. Desperate in Florida.

12-18-2017	#8
Ccmano Join Date: Jun 2006 Location: Sparks, NV Posts: 2,852	Re: WANTED: Cam position sensor for LT5 I hesitate to say it but White Racing Products in FL. shows one in stock. $296.00 These guys are a craps shoot http://www.whiteracingproducts.com/i...roducts_id=596 The next site has a listing of dealers that supposedly have them in stock. Good luck! http://oemcats.com/oem-parts/10137658.html H __________________ 90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. Last edited by Ccmano; 12-18-2017 at 01:46 PM.

12-18-2017	#9
Mystic ZR-1 Join Date: Jan 2010 Location: Mystic CT Posts: 2,632	Re: WANTED: Cam position sensor for LT5 FWIW: Have your injectors been replaced? Code 31 was just one of the spurious codes that showed up when my injectors crapped out...

12-18-2017	#10
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,658	VRe: WANTED: Cam position sensor for LT5 Wonder if there is an alternative sensor out there that could be adapted to work in place of the original OEM cam sensor? __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake Last edited by Jagdpanzer; 12-18-2017 at 05:56 PM.