|
06-19-2008
|
#1 |
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Would these studs work with 18mm spacer??
Heat-treated 8740 chrome moly studs have a tensile strength of 190,000 psi to handle the shock loads and lateral forces in racing applications. Pack of 5 studs. Lug nuts are sold separately.
Thoughts? Thanks LGAFF 92 ZR1 #234 Last edited by LGAFF; 04-15-2009 at 10:57 PM. |
|
|
|
06-19-2008
|
#2 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Would these studs work with 18mm spacer??
Late F-Body, Corvette (Short)0.509"0.315"2.185"none2.500"M12x1.5
Looks like threads are 2.185" LGAFF 92 ZR1 #234 |
|
|
|
|
06-19-2008
|
#3 |
 Join Date: Oct 2004
Posts: 1,889
|
Re: Would these studs work with 18mm spacer??
You decided to try 18mm spacers?
Measure the backside of the wheel through the wheel to the deepest point of the taper(wheel nut seat), add 18mm for spacer and it looks like you need 18mm to extend "just beyond" the threads of the OE nut. ONLY JUST BEYOND THE THREADS! I believe the aircraft standard is three full threads beyond, that would require something at 23-24mm. (1.5 pitch x 3) |
|
|
|
|
06-19-2008
|
#4 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,150
|
Re: Would these studs work with 18mm spacer??
bring a wheel to my house, we can bolt it up tot he rear with my 20mm spacer to see if you like it..
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
 |
|
|
Linear Mode
