|
08-14-2010
|
#1 |
  
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Accel FI part # for set for a 90 LT5?
Trying to run down a set of Accel (sp?) fuel injectors for a 90 LT5 today.
Anyone have the Accel part # handy??? TIA P.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
|
|
08-14-2010
|
#2 |
 
Join Date: Jul 2004
Location: Kalamazoo MI
Posts: 1,760
|
Re: Accel FI part # for set for a 90 LT5?
http://www.summitracing.com/parts/ACC-150821/
individual part number is 150121 I bought my 16 150121s from a place called atlantic speed and they no longer carry them. This guy also has some good injectors or so members on the other fourm have praised them. http://fuelinjectorconnection.com/sh...&productId=165 I was actually thinking of getting a set of his and trying them out. they are cheaper than you can find the accels and his are flow matched and have a warranty, thats why I was thinking about them. I have the accels and I think I have a bad injector again..
__________________
JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything. |
|
|
|
|
08-14-2010
|
#3 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,696
|
Re: Accel FI part # for set for a 90 LT5?
When I did my P&P, I decided to swap everything out under the plenum at the same time. So I bought a set of the Accels from Atlantic Speed.
Also replaced coils with MSDs. Did not want to leave anything to chance. |
|
|
|
|
08-14-2010
|
#4 |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,154
|
Re: Accel FI part # for set for a 90 LT5?
I agee with Dom. I went with RCs and OEM coils although. Its just sound advise while the plenums off IMHO
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
08-14-2010
|
#5 |
|
Join Date: Jul 2010
Location: Woodstock, Ontario, Canada
Posts: 1,275
|
Re: Accel FI part # for set for a 90 LT5?
The Accel literature states that all Accel port fuel injectors are flow tested and are within 1.5% of their nominal flow rating.
Has anyone had a set on an injector test bench? peace Hog |
|
|
|
|
08-15-2010
|
#6 | |
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,680
|
Re: Accel FI part # for set for a 90 LT5?
Quote:
I think Mark H has tested them and has found it to be true. Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
|
|
|
|
08-15-2010
|
#7 |
|
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: Accel FI part # for set for a 90 LT5?
Thanks for the injector info!
P.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
|
|
|
08-15-2010
|
#8 | |
|
Join Date: Jul 2010
Location: Woodstock, Ontario, Canada
Posts: 1,275
|
Re: Accel FI part # for set for a 90 LT5?
Quote:
peace Hog |
|
|
|
|
 |
|
|
Linear Mode
