Fidanza Flywheel what Clutch ?? - ZR-1 Net Registry Forums

Vettl98 · 06-30-2010

Hello i have a 92 ZR1 and want to install
a Fidanza Flywheel

so what is the right Clutch for the Vett to use the Vett on the Road

some tell me the
Clutch kit from the Camaro is the best
and a old Friend

tell me to use a special Slave cylinder and a Clutch from DRM
i ask at DRM but get now answer so please let me know when you have
anny information
wfg
Jochen

Kb7tif · 06-30-2010

Quote:

Originally Posted by Vettl98

Hello i have a 92 ZR1 and want to install

a Fidanza Flywheel

so what is the right Clutch for the Vett to use the Vett on the Road

some tell me the

Clutch kit from the Camaro is the best
and a old Friend

tell me to use a special Slave cylinder and a Clutch from DRM
i ask at DRM but get now answer so please let me know when you have
anny information
wfg
Jochen

This stuff has been covered many times in detail. With opinions from all, do some work searching the archives on both sites. The modification is give and take.

Scrrem · 06-30-2010

If it's going to be a daily driver, don't go too aggressive, I instaled a stage II SPEC clutch with a Fidanza and it's a bit harsh upon engagement, not street friendly. Took me some getting use to but love it at the strip. I was told my a member recently that the Center Force clutches are awsome and engagement is smooth as glass.
Rich

rhipsher · 06-30-2010

Jochen I've had two different clutches with the Fidanza. The first was the stock clutch/preasure plate with a centerforce sprung hub disk which I liked. Now I have a Spec stage 3+ with the Fidanza which I like even more. The Stage 3 is different than the Stage 3+. The 3+ is a full face disk unlike the puck disign in the stage 3 so the 3+ engages just like the stock one does but has clamping force for up to 800hp.

Hammer · 07-01-2010

I used a stock pressure plate and a Stage 2 disc from Carolina Clutch. over 4,000 miles now and no problems. I like it.

Vettl98 · 07-01-2010

Thanks a lot for the answers
so i hope i will finde the right one
thanks a lot from Austria
wfg
Jochen

XfireZ51 · 07-01-2010

Quote:

Originally Posted by rhipsher

Jochen I've had two different clutches with the Fidanza. The first was the stock clutch/preasure plate with a centerforce sprung hub disk which I liked. Now I have a Spec stage 3+ with the Fidanza which I like even more. The Stage 3 is different than the Stage 3+. The 3+ is a full face disk unlike the puck disign in the stage 3 so the 3+ engages just like the stock one does but has clamping force for up to 800hp.

rphipsher,

Is that a sprung hub? What about the rattle can noise from the trans?

rhipsher · 07-01-2010

Quote:

Originally Posted by XfireZ51

rphipsher,

Is that a sprung hub semi metallic disk? What about the rattle can noise from the trans?

It's a no sprung hub.

And I can tell you it works great with very little rattle. And you can ask FULLPWR and USAFPILOT. They've both been in my car and can vouch for how little rattle they hear.

Vettl98 · 08-05-2010

sorry for my uncnown
te tell me all fix clutch will rattle
and the clutch wit the spring are not what do you think
thanks a lot
Jochen

rhipsher · 08-05-2010

???

06-30-2010	#1
Vettl98 Join Date: Sep 2009 Location: Austria Posts: 34	Fidanza Flywheel what Clutch ?? Hello i have a 92 ZR1 and want to install a Fidanza Flywheel so what is the right Clutch for the Vett to use the Vett on the Road some tell me the Clutch kit from the Camaro is the best and a old Friend tell me to use a special Slave cylinder and a Clutch from DRM i ask at DRM but get now answer so please let me know when you have anny information wfg Jochen __________________ 1992 Corvette ZR1 Polo Green ll 382

06-30-2010	#3
Scrrem Join Date: Feb 2009 Location: Alexandria, Virginia Posts: 1,469	Re: Fidanza Flywheel what Clutch ?? If it's going to be a daily driver, don't go too aggressive, I instaled a stage II SPEC clutch with a Fidanza and it's a bit harsh upon engagement, not street friendly. Took me some getting use to but love it at the strip. I was told my a member recently that the Center Force clutches are awsome and engagement is smooth as glass. Rich __________________ 1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member

06-30-2010	#4
rhipsher Join Date: Aug 2008 Location: Houston 90 Red ZR-1 Posts: 2,320	Re: Fidanza Flywheel what Clutch ?? Jochen I've had two different clutches with the Fidanza. The first was the stock clutch/preasure plate with a centerforce sprung hub disk which I liked. Now I have a Spec stage 3+ with the Fidanza which I like even more. The Stage 3 is different than the Stage 3+. The 3+ is a full face disk unlike the puck disign in the stage 3 so the 3+ engages just like the stock one does but has clamping force for up to 800hp.

07-01-2010	#5
Hammer Join Date: Apr 2006 Location: Ideho Posts: 2,653	Re: Fidanza Flywheel what Clutch ?? I used a stock pressure plate and a Stage 2 disc from Carolina Clutch. over 4,000 miles now and no problems. I like it. __________________ [I][FONT=Comic Sans MS]John Boyd[/FONT][/I] [I][FONT=Comic Sans MS][SIZE=1]Ideho[/SIZE][/FONT][/I] [FONT=Comic Sans MS][SIZE=1][I]2015 ZL1 [/I][I]Camaro #1121 BLACK/BLACK 6 SPD (540 RWHP)[/I][/SIZE][/FONT] [I][FONT=Comic Sans MS][SIZE=1]1991 ZR-1 #458 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK 72[/COLOR]k miles ([B][COLOR=red]SOLD[/COLOR][/B]) 1991 ZR-1 #473 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK [/COLOR]37k miles ([B][COLOR=red]SOLD[/COLOR][/B])[/SIZE][/FONT][/I]

07-01-2010	#6
Vettl98 Join Date: Sep 2009 Location: Austria Posts: 34	Re: Fidanza Flywheel what Clutch ?? Thanks a lot for the answers so i hope i will finde the right one thanks a lot from Austria wfg Jochen __________________ 1992 Corvette ZR1 Polo Green ll 382

08-05-2010	#9
Vettl98 Join Date: Sep 2009 Location: Austria Posts: 34	Re: Fidanza Flywheel what Clutch ?? sorry for my uncnown te tell me all fix clutch will rattle and the clutch wit the spring are not what do you think thanks a lot Jochen __________________ 1992 Corvette ZR1 Polo Green ll 382