![]() |
#1 |
![]() Join Date: Feb 2010
Location: Ochlocknee, GA
Posts: 434
|
![]()
Just to let everyone know that I will not be making any more ZR-1 Splash
front plates. I have in stock (11) ZR-1 Splash plate for the 1990 ZR-1 and (5) ZR-1 Splash plates for the 1991 thru 1995 Each plate cost $85.00 and shipping is included. You can send me a PM for information on how to order. Thank you John 1990 white/black # 2546 one of a few 4l8OE eq ZR=1's |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Aug 2021
Location: Bradenton, FL
Posts: 136
|
![]()
Sent ya a PM John
![]() Jay |
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Nov 2018
Location: Bartlett Illinois
Posts: 186
|
![]()
Hi John,
Do you have any 1995 splash plates left? Thanks in advance Mike P. |
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Feb 2010
Location: Ochlocknee, GA
Posts: 434
|
![]()
Hi Mike,
Sorry all sold out.I tried to get premission from GM to sell them,but was denied. Now I was thinking what if I made just a blank front plate for 1984 thru 1990 and 1991 thru 1996 and the custormor made a decal of their own design on the blank front plate. What do you think? John |
![]() |
![]() |
![]() |
#5 |
![]() Join Date: Jul 2020
Location: Nashville TN
Posts: 315
|
![]()
GM can?t stop you from giving them away for free
Side note, I must have gone too fast. Mine caved in a bit and did not hold shape. |
![]() |
![]() |
![]() |
#6 |
![]() Join Date: Feb 2010
Location: Ochlocknee, GA
Posts: 434
|
![]()
Sorry your plate caved in , where did it warp? middle ,side. So far yours is the
first I have heard about. I'am going to check with my supplier about the material he used to make them. I'll let you know he tells me. John |
![]() |
![]() |
![]() |
#7 |
![]() Join Date: Jul 2020
Location: Nashville TN
Posts: 315
|
![]()
I was surprised John. It seemed thick enough. I will try to take a picture tomorrow. I wonder if the paint affects that plastic and weakened it or if that was not a factor.
|
![]() |
![]() |
![]() |
#8 |
![]() Join Date: Feb 2010
Location: Ochlocknee, GA
Posts: 434
|
![]()
Mikey,
I found my old post on the type of plastic used to make the ZR-1 Splash front plate . Its called EPOXACRYLATE, I do not know if the paint you used effects the material used to make the ZR-1 splash front plate. I have not gotten an answer from the manufacturer of the plates. John |
![]() |
![]() |
![]() |
#9 |
![]() Join Date: Jul 2020
Location: Nashville TN
Posts: 315
|
![]()
-Z- is about 1/4 inch concave and -1- is about 1/8 inch concave.
Reflection of my level straight edge in the cover plate above the ZR-1 helps illustrate the curvature. Single stage body paint plus spray can of clear from auto zone. |
![]() |
![]() |
![]() |
#10 |
![]() Join Date: Feb 2013
Location: Yakima Washington
Posts: 401
|
![]()
Just sent you a PM.
__________________
Jim 1990 Z # 2441 1959 c-1 230 HP 4 speed frost blue/silver 3 owner 2011 cts-v 556 HP, manual 6 speed 1955 chev 2dr ht PP 265 3 speed w/OD |
![]() |
![]() |
![]() |
|
|