|
04-24-2023
|
#1 |
 Join Date: Jul 2020
Location: Nashville TN
Posts: 323
|
side and rear emblems
I'm sure this has been posted before, but I'm having trouble finding what I'm looking for with the search function..
I bought new emblems for hood sides and the rear bumper. My car is a 1991. the emblems have 2 posts on the back but did not come with any hardware, just double sided foam tape cut to the shape of the emblems. What is the purpose of the two posts? Is there hardware to attach them from behind if I drill holes in the hood? Is the adhesive sufficient so that I don't have to drill holes in the hood? (just cut the posts off?) Can someone post or send me a photo of a later year car showing the inside of the hood where these attach? And how about the rear emblem - any tips for removing the old one to install the new one? Thanks! Mike |
|
|
|
04-24-2023
|
#2 |
 Join Date: Aug 2006
Location: McLean, VA
Posts: 3,721
|
Re: side and rear emblems
There is no hardware that attaches from the back. Holes are on the sides of the hood and on the bumper as mounting guide.
I?ll try to remember to take a pic and post. |
|
|
|
04-24-2023
|
#3 |
 
Join Date: May 2010
Location: Japan
Posts: 3,583
|
Re: side and rear emblems
Whatever you do, do not drill holes in your car for the posts. Just cut off the posts and the 3M double stick tape is plenty strong to hold them on. There are specific measurements in the factory service manual or otherwise can be posted and shared for placement.
Sent from my iPhone using ZR-1 Net Registry
__________________
Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048 
|
|
|
|
|
04-24-2023
|
#4 |
|
Join Date: Jul 2020
Location: Nashville TN
Posts: 323
|
Re: side and rear emblems
Perfect thanks guys. I will use measurements I found in another thread and use painters tape to make a guide edge. Glad to hear I do not need to drill.
|
|
|
|
|
04-24-2023
|
#5 |
|
Join Date: Jul 2020
Location: Nashville TN
Posts: 323
|
Re: side and rear emblems
Oh, could still use advice on removing old rear bumper emblem.
|
|
|
|
|
04-24-2023
|
#6 |
Join Date: Sep 2008
Location: Mullica Hill, New Jersey
Posts: 2,592
|
Re: side and rear emblems
fishing line
 Marty |
|
|
|
|
04-24-2023
|
#7 |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: side and rear emblems
Or skinny weed whacker line.
The early Z's only had the rear bumper emblem. The side hood emblems didn't come along until later. As stated just trim off the nubs and mount
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
04-24-2023
|
#8 | |
|
Join Date: Jun 2019
Location: MA
Posts: 27
|
Re: side and rear emblems
Quote:
|
|
|
|
|
|
04-24-2023
|
#9 | |
|
Join Date: Jul 2020
Location: Nashville TN
Posts: 323
|
Re: side and rear emblems
Quote:
91 did not have side emblems. I'm adding them and was asking if anyone had inside hood photos of the later year cars that had factory installed emblems on the hood. |
|
|
|
|
|
04-24-2023
|
#10 | |
|
Join Date: Jul 2020
Location: Nashville TN
Posts: 323
|
Re: side and rear emblems
Quote:
|
|
|
|
|
 |
|
|
Linear Mode
