11-06-2020 | #1 |
Join Date: Feb 2018
Location: owens valley
Posts: 25
|
Oil pressure gauge problem
My gauge pegs soon as I turn on the ignition . Is it the sensor or something else ?
|
11-06-2020 | #2 |
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,391
|
Re: Oil pressure gauge problem
Unplug the sensor. If it doesn't move from 0, probably the sensor
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
11-08-2020 | #3 |
Join Date: Feb 2018
Location: owens valley
Posts: 25
|
Re: Oil pressure gauge problem
Thanx is there a special socket for removing it
|
11-08-2020 | #4 |
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,391
|
Re: Oil pressure gauge problem
Yes, but when professionally applied, a pair of small channel locks work just fine.
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
11-15-2020 | #5 |
Join Date: Jun 2005
Location: CenCoast California
Posts: 899
|
Re: Oil pressure gauge problem
If unprofessionally applied a hammer works good, too.
__________________
Hib Halverson Technical Writer former owner 95 VIN 0140 current owner 19 VIN 1878 |
|
|