reattach defogger wire. - ZR-1 Net Registry Forums

RICHARD TILL · 12-29-2005

can anyone tell me how to reattach the rear window defogger wire to the glass? i can`t imagine how i`d do it. also, i`ve allready removed the ltpws sensor from the right front. going to remove the rest as i replace tires. now the ltpws and the low pressure light comes on. would there be a problem if i just removed the bulbs? i think not but just asking......thanks in advance..............richard.........

cuisinartvette · 12-29-2005

My defogger has separated from the glass, too.
Anxious to hear the fix.

tomtom72 · 12-29-2005

Hi Guys, GM has a repair kit for the grid lines if they break. P/N 1052858. The stuff is in section 10-2-7 of the helm. I've been told by a body guy I knew that if the wire just separates from the glass but is not broken a little of that rear viev mirror glue can be used to reattach it to the glass.

Richard, take out the bulbs in the DIC. That's what most people do if they abandon the LTPWS. I think that is the most common alteration, to remove anything else like the reciever is fairly complicated.

Tom

12-29-2005	#1
RICHARD TILL Join Date: Aug 2005 Location: Iuka, Mississippi 38852 Posts: 756	reattach defogger wire. can anyone tell me how to reattach the rear window defogger wire to the glass? i can`t imagine how i`d do it. also, i`ve allready removed the ltpws sensor from the right front. going to remove the rest as i replace tires. now the ltpws and the low pressure light comes on. would there be a problem if i just removed the bulbs? i think not but just asking......thanks in advance..............richard.........

12-29-2005	#2
cuisinartvette Join Date: Aug 2005 Location: San Fernando Valley, CA. Posts: 896	Re: reattach defogger wire. My defogger has separated from the glass, too. Anxious to hear the fix.

12-29-2005	#3
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,645	Re: reattach defogger wire. Hi Guys, GM has a repair kit for the grid lines if they break. P/N 1052858. The stuff is in section 10-2-7 of the helm. I've been told by a body guy I knew that if the wire just separates from the glass but is not broken a little of that rear viev mirror glue can be used to reattach it to the glass. Richard, take out the bulbs in the DIC. That's what most people do if they abandon the LTPWS. I think that is the most common alteration, to remove anything else like the reciever is fairly complicated. Tom __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member