ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings

Reply
 
Thread Tools Display Modes
Old 08-06-2021   #1
Erik
 
Join Date: Nov 2016
Location: New Brunswick
Posts: 936
Default Is There A Travelling ZR-1 Mechanic/Guru?

Seeing as how the world is starting to open up a bit, and Marc Haibeck is still far away from me up here in Canada, I was wondering if anyone had ever heard of a travelling Zr-1 mechanic. I'd almost bought a early 2000's Aston Martin Vanquish last year, and had arranged with a Scottish mechanic to fly to Canada to give it a good going over and setting right. Qualified Aston mechanics were rare up here, and qualified Vanquish ones even more so. He apparently travelled around Europe and North America, fixing Astons, aside from the work he did at his own garage. He was also surprisingly reasonable in pricing. Travel costs, plus a very reasonable hourly rate.

Anyhow, I have found a very competent mechanic up here who works on all types of exotics, but, he doesn't have a ton on ZR-1 experience. I'd love to get someone who know them well to give it a good going over also. Yes, Ideally I would take it to Marc or Graham, but they are a heck of a distance away with Shipping being be a few thousand either way.

Just wondering if anyone had heard of such a service for the ZR-1.
__________________
1990 ZR-1 # 996

"All Corvettes are red. The rest are mistakes." - John Heinricy

Last edited by Erik; 08-08-2021 at 10:14 PM.
Erik is offline   Reply With Quote
Old 08-06-2021   #2
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,154
Default Re: Is There A Travelling ZR-1 Mechanic/Guru?

Quote:
Originally Posted by Erik View Post
Seeing as how the world is starting to open up a bit, and Marc Haibeck is still far away from me up here in Canada, I was wondering if anyone had ever heard of a travelling Zr-1 mechanic. I'd almost bought a early 2000's Aston Martin Vanquish last year, and had arranged with a Scottish mechanic to fly to Canada to give it a good going over and setting right. Qualified Aston mechanics were rare up here, and qualified Vanquish ones even more so. He apparently travelled around Europe and North America, fixing Astons, aside from the work he did at his own garage. He was also surprisingly reasonable in pricing. Travel costs, plus a very reasonable hourly rate.

Anyhow, I have found a very competent mechanic up here who works on all man over exotics, but, he doesn't have a ton on ZR-1 experience. I'd love to get someone who know them well to give it a good going over also. Yes, Ideally I would take it to Marc or Graham, but they are a heck of a distance away with Shipping being be a few thousand either way.

Just wondering if anyone had heard of such a service for the ZR-1.
I have not. Where the LT5 is concerned it's a you travel to them experience...

Unless you are independently wealthy and also have all the tools and equipment to pay somebody for that luxury to come to your home.
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V

Last edited by GOLDCYLON; 08-06-2021 at 11:40 PM.
GOLDCYLON is offline   Reply With Quote
Old 08-06-2021   #3
Erik
 
Join Date: Nov 2016
Location: New Brunswick
Posts: 936
Default Re: Is There A Travelling ZR-1 Mechanic/Guru?

Quote:
Originally Posted by GOLDCYLON View Post
I have not. Where the LT5 is concerned it's a you travel to them experience...

Unless you are independently wealthy and also have all the tools and equipment to pay somebody for that luxury to come to your home.
Where I am, it's scary expensive either way. Probably more expensive to get it shipped to a guru, then shipping a guru up here.

ZR-1 service and repair, outside of the US, during Covid, is not an easy undertaking.
__________________
1990 ZR-1 # 996

"All Corvettes are red. The rest are mistakes." - John Heinricy

Last edited by Erik; 08-06-2021 at 11:58 PM.
Erik is offline   Reply With Quote
Old 08-07-2021   #4
WARP TEN
 
WARP TEN's Avatar
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,051
Default Re: Is There A Travelling ZR-1 Mechanic/Guru?

Erik, it seems that you are a little bit between a rock and a hard place on this. If you are talking about a need for normal maintenance items or relatively simple things like a plenum pull, injectors, coils etc. you are probably best off with your strong local guy and getting him help via the Net Registry or direct calls to guys like Marc, who will almost always take the time to talk to folks about how to do things. If you are in need of more major surgery, like transmission repair, an engine rebuild (or better, a Haibeck 510HP package) or other significant needs, then shipping the car or major component out might be your best bet, regardless of the extra cost. Much depends on your actual needs, but I know many folks with situations like yours who simply shipped a car or component to Marc for work. I remember back quite a few years one of the three ZR-1 owners in Spain at the time could not solve an engine operation problem despite many attempts, so he crated up the engine and shipped it to Marc. Marc worked on it then finally figured out that the factory service manual had an incorrect wiring diagram in it--several wires were miscoded with the wrong colors, a fact that had tripped up the car's owner. Once he figured that out, it was an easy fix for him and he shipped it back in good shape. But not many in the world would have figured this issue out, so it was worth it for the owner. Good luck with the ZR-1 and I hope it keeps running well for you. --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
WARP TEN is offline   Reply With Quote
Old 08-08-2021   #5
DRM500RUBYZR-1
 
DRM500RUBYZR-1's Avatar
 
Join Date: Sep 2008
Location: Mullica Hill, New Jersey
Posts: 2,566
Default Re: Is There A Travelling ZR-1 Mechanic/Guru?

Whenever a vacuum exists; something always eventually fills it.
I concur.
A "traveling" ZR-1 Guru, could likely do quite well.
Of course there are those that would be offended by or pooh - pooh such things, but Erik cites the economic factors that support such an enterprise.
Many fix their own misbehaving toilets.
Others pay the plumber, and pay handsomely for their value add.
Long live capitalism, I love it so!
Such an efficient mechanism.
If only I were younger and had an aircraft......................

Marty
DRM500RUBYZR-1 is offline   Reply With Quote
Old 08-08-2021   #6
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,154
Default Re: Is There A Travelling ZR-1 Mechanic/Guru?

Best ad I ever saw for a plumper was "your crap, is my bread and butter"
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 08-08-2021   #7
Erik
 
Join Date: Nov 2016
Location: New Brunswick
Posts: 936
Default Re: Is There A Travelling ZR-1 Mechanic/Guru?

Quote:
Originally Posted by DRM500RUBYZR-1 View Post
Whenever a vacuum exists; something always eventually fills it.
I concur.
A "traveling" ZR-1 Guru, could likely do quite well.
Of course there are those that would be offended by or pooh - pooh such things, but Erik cites the economic factors that support such an enterprise.
Many fix their own misbehaving toilets.
Others pay the plumber, and pay handsomely for their value add.
Long live capitalism, I love it so!
Such an efficient mechanism.
If only I were younger and had an aircraft......................

Marty
Apparently, travelling exotic car mechanics are not an unusual thing, in the exotic car world. There are lots of rare cars in all sorts of places in the world, and those folks are willing to have their cars worked on regardless of where they are. Likely, the lack of such a ZR-1 travelling mechanic is a symptom of the low value of the cars currently. If they were up in the few hundred thousand range, the situation would be different.
__________________
1990 ZR-1 # 996

"All Corvettes are red. The rest are mistakes." - John Heinricy
Erik is offline   Reply With Quote
Old 08-09-2021   #8
dredgeguy
 
dredgeguy's Avatar
 
Join Date: Aug 2012
Location: Ellicott City, MD
Posts: 1,645
Default Re: Is There A Travelling ZR-1 Mechanic/Guru?

Not to fear, as Wazoo sorts out the ZR-1's in our local area and within our group, what are we going to do once everything is sorted and all the mods are done? I can see "road trip" being the call of the future! Only drawback I can see is bringing or having all the items needed to do the job. When we were working on Dimitri's car this past weekend, Jim needed to make the short drive home to pick up some missing small parts. We can always improvise...the rubber end of the dip stick tube was missing. We did not have a spare one so 2 O-rings worked to take up the space and seal the area and will do the job. But then again, the way Jim packs for his month long trips, guess a larger "go bag" could be developed. With such talent in our group, would be fun but then you always have the liability issue.............
__________________
Charlie

__________
Dredgeguy
WAZOO Member

1992 Bright Red/Black ZR1 #246
Dana 4:10 gears
Polished LT5 by Haibeck
Polished Fikse FM5's with Michelin Pilot Sport 2
Stainless Works headers and cats with Corsa
dredgeguy is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:15 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020