ZR-1 Parts for sale - ZR-1 Net Registry Forums

Sgreg · 04-17-2008

Move happens in less than 30 days and I still have many Zr-1 parts that I need to sell. In no particular order here is a partial list. All are what I paid or less:

Remanufactured ECM 90-91 # 1228331, $300 SOLD

1990 Catback exhaust less than 2,000 miles stored carefully $350 SOLD

2 used 91 ZR-1 mufflers with tips good $75

New 90-91 ZR-1 PBR master cylinder $145 SOLD

1 C4 and ZR-1 power seat track $100

1 90-92 factory ZR-1 breather Box complete with Low mile K&N filter $85

1 90-95 graphite oil pump seal $135

1 set of ZR-1 GM used injectors $45 (at least 13/16 test good) SOLD

Complete A.I.R. set-up for 91 ZR-1 (probably 90 as well) pump and hoses, etc. $90 SOLD

Many more small parts and transmission parts new and used. All parts plus shipping.

32valvZ · 04-17-2008

Do you happen to have a tranny inspection cover plate? Covers the flywheel in the front of the tranny....I think it has like 4 10mm bolts that fasten it.

Sgreg · 04-17-2008

Sorry, I have front and rear bearings and a couple of syncros.

GOLDCYLON · 04-18-2008

Greg did you sell that reman Alternator you were selling a while back? Daryll

Sgreg · 04-18-2008

Quote:

Originally Posted by GOLDCYLON

Greg did you sell that reman Alternator you were selling a while back? Daryll

Daryll, lost my alternator on a recent trip and had to install it in my car. So it is put to good use !!

GOLDCYLON · 04-18-2008

Quote:

Originally Posted by Sgreg

Daryll, lost my alternator on a recent trip and had to install it in my car. So it is put to good use !!

Well that figures but it sure is nice to have parts on hand eh?

Oh well the quest continues for a shelfware spare. Thanks Greg. D

Pete · 04-18-2008

Do you have a ZF trans gasket? (the main housing gasket)

What Syncros do you have? New/Used?
Please let me know what other ZF parts you have.

Pete

Sgreg · 04-18-2008

Quote:

Originally Posted by Pete

Do you have a ZF trans gasket? (the main housing gasket)

What Syncros do you have? New/Used?
Please let me know what other ZF parts you have.

Pete

I have one new and one exc. used syncro I got from Bill Boudreau. I think they can be used in positions 1-4. Also have new front and rear bearings.

-=Jeff=- · 04-24-2008

Quote:

Originally Posted by Sgreg

Many more small parts and transmission parts new and used. All parts plus shipping.

Like what?

Sgreg · 04-24-2008

Quote:

Originally Posted by -=Jeff=-

Like what?

Temperature sensor, Map sensor and hose, factory cam cover bolts, oil pump o-rings, cam cover o-rings. Oil pressure sensor , various rebuildable cores (CDM, Alternator, power seat tract ). set of factory heat shields, thermostat and gasket, one exhaust gasket, and many more odds and end. NO body parts and interior.

04-17-2008	#1
Sgreg Join Date: Aug 2006 Location: Texas Posts: 518	ZR-1 Parts for sale Move happens in less than 30 days and I still have many Zr-1 parts that I need to sell. In no particular order here is a partial list. All are what I paid or less: Remanufactured ECM 90-91 # 1228331, $300 SOLD 1990 Catback exhaust less than 2,000 miles stored carefully $350 SOLD 2 used 91 ZR-1 mufflers with tips good $75 New 90-91 ZR-1 PBR master cylinder $145 SOLD 1 C4 and ZR-1 power seat track $100 1 90-92 factory ZR-1 breather Box complete with Low mile K&N filter $85 1 90-95 graphite oil pump seal $135 1 set of ZR-1 GM used injectors $45 (at least 13/16 test good) SOLD Complete A.I.R. set-up for 91 ZR-1 (probably 90 as well) pump and hoses, etc. $90 SOLD Many more small parts and transmission parts new and used. All parts plus shipping. __________________ 1991 ZR-1, Black, Black, # 541 Last edited by Sgreg; 05-13-2008 at 12:03 AM.

04-17-2008	#2
32valvZ Join Date: Nov 2007 Location: Sunshine State Posts: 1,071	Re: ZR-1 Parts for sale Do you happen to have a tranny inspection cover plate? Covers the flywheel in the front of the tranny....I think it has like 4 10mm bolts that fasten it. __________________ [B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B]

04-17-2008	#3
Sgreg Join Date: Aug 2006 Location: Texas Posts: 518	Re: ZR-1 Parts for sale Sorry, I have front and rear bearings and a couple of syncros. __________________ 1991 ZR-1, Black, Black, # 541

04-18-2008	#4
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: ZR-1 Parts for sale Greg did you sell that reman Alternator you were selling a while back? Daryll __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

04-18-2008	#7
Pete Join Date: Dec 2003 Location: Chicagoland,IL Posts: 2,679	Re: ZR-1 Parts for sale Do you have a ZF trans gasket? (the main housing gasket) What Syncros do you have? New/Used? Please let me know what other ZF parts you have. Pete __________________ '91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage