ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 05-30-2022   #1
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,686
Default Polyurethane bushings

In another example of the ?while you are there? maintenance of our ZRs, I replaced the rear wheel bearings on my 92. Its been a while and I kept hearing a slight scraping sound coming from the right rear. Put the rear end up and checked for play and yeah left side rocked a bit, left rear was solid. So ordered two Timken bearings from RA. Once I had wheels off, I could see that the rear sway bar end link bushings were shot. So ordered a set of the Poly bushings from Energy Suspension. Fortunately they came in time for me to do the whole job at the same time. Takes longer the older u get! 🤣🤪 Getting the old ones out took a bit but they were clearly the originals.
Long story short, I can definitely feel that the rear suspension is ?crisper?. The increased stiffness is noticeable.
Several years ago I did do Poly bushings all the way around but not the rear sway bar or the rear diff.
Wondering if anyone else has noticed an increased ride stiffness if you have done this upgrade.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is offline   Reply With Quote
Old 05-31-2022   #2
longhorns05
 
longhorns05's Avatar
 
Join Date: Mar 2019
Location: Austin, TX
Posts: 44
Default Re: Polyurethane bushings

Recently just installed a rear lowering kit w/ poly bushings on my 94. Felt like it tightened things up back there on mine as well. Ironically I think mine needs a right rear wheel bearing too.
__________________
93 ZR-1 Red/Red 415ci
Jeal cams/headers, hf cats, B&B
Wilwood brakes, DRM coilovers

94 ZR-1 Red/Blk 368ci
SW headers, hf cats, Corsa

16 GT-R Blk/Blk Stg1 3.8
BL1200X, Shep1k, Motec
1250 whp on pump e85
longhorns05 is offline   Reply With Quote
Old 06-01-2022   #3
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,686
Default Re: Polyurethane bushings

Had lunch w Pete P. We discovered that I had installed sway bar upside down. I?ll be correcting that today. 🤣🤣👍
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is offline   Reply With Quote
Old 06-01-2022   #4
WARP TEN
 
WARP TEN's Avatar
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,051
Default Re: Polyurethane bushings

Quote:
Originally Posted by XfireZ51 View Post
Had lunch w Pete P. We discovered that I had installed sway bar upside down. I?ll be correcting that today. 🤣🤣👍
As Gilda Radner's book title said, "It's Always Something"!--Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
WARP TEN is offline   Reply With Quote
Old 06-01-2022   #5
Ccmano
 
Ccmano's Avatar
 
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
Default Re: Polyurethane bushings

Quote:
Originally Posted by XfireZ51 View Post
Had lunch w Pete P. We discovered that I had installed sway bar upside down. I?ll be correcting that today. 🤣🤣👍
I tried that with the front sway bar once.... lol. Don't sweat it!
H
__________________
90'ZR-1 #1461 Red/Black
Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold
08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold
05 C6 Z51 Red/Black Sold
90'ZR-1 #1723 Black/Gray Sold but not forgotten
91' Z51 L98 White Vert. My First, you always remember your first. Sold.
Ccmano is offline   Reply With Quote
Old 06-01-2022   #6
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,686
Default Re: Polyurethane bushings

Hans,

Took a bit m. Turns out I had one of the bar links reversed as well. Took it out for a spin today. Ride is stiff but manageable and corners flat.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:30 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020