![]() |
#1 |
Join Date: May 2021
Location: Waynesboro, VA
Posts: 9
|
![]()
MY 1991 has 15,000 miles on its. Carpet overall in great shape except area around driver's footrest on left side. Two thread bare areas. Any thoughts on repairs? All the carpet sales I find are for all the carpet or areas I don't need. I thought there might be a plastic cover offered for that area but no luck finding it. My color is red. Thanks.
|
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Jun 2020
Location: Houston, TX
Posts: 183
|
![]()
Welcome to the forum - but if yours is a 1991, you're posting in the wrong place - should be under the C4 section.
I had a threadbare strip in my red '91 too, right next to the footrest. I bought a small strip of red carpet on eBay, cut a sliver out, and glued it in there with automotive carpet glue. Doesn't look perfect but also doesn't attract any attention - basically you can't see it if you're not looking for it. See before and after pics. Sorry for the before pic being so blurry but hopefully you get the idea. |
![]() |
![]() |
![]() |
#3 |
Join Date: May 2021
Location: Waynesboro, VA
Posts: 9
|
![]()
Thanks. I will check on ebay
|
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Dec 2020
Location: Pittsburgh
Posts: 142
|
![]()
I have the same problem in my 92. Emorse if you find something let me know
|
![]() |
![]() |
![]() |
#5 |
![]() ![]() ![]() Join Date: May 2007
Location: Peoria, AZ
Posts: 9,154
|
![]()
As to prevention I recommend the fox weather boots.
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director ![]() 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
![]() |
![]() |
![]() |
#6 |
![]() Join Date: Apr 2004
Location: ATL. GA.
Posts: 2,169
|
![]()
I've often wondered why no one has come up with a dead pedal cover for this area.
__________________
Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold |
![]() |
![]() |
![]() |
#7 |
![]() Join Date: Aug 2006
Location: McLean, VA
Posts: 3,710
|
![]()
I did the same as ram-g with a twist. Instead of similar carper from eBay, I cut a doner piece under the door sill and shaved rubber backing. Shaved piece was glued on using crazy glue.
|
![]() |
![]() |
![]() |
#8 |
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,057
|
![]()
Before mine started to wear I cut a small piece of clear vinyl and taped it to the problem area over lapping the edge.
|
![]() |
![]() |
![]() |
#9 |
![]() Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,065
|
![]()
I did something similar on the '95. My BMW dealership was using clear plastic floor mats for its used cars which were adhesive on the back. I just cut out a piece of that material and stuck it on the carpet where my foot would tend to wear it. Great solution if you have not got much wear to begin with. I believe that kind of adhesive clear plastic material is also sold at home improvement stores as a carpet protector, but usually in large rolls. Anyone who is a remodeling contractor would have some. BTW, I also put some to the right of the accelerator pedal when my foot tends to wear the carpet. Worked great, no wear.--Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" Last edited by WARP TEN; 06-09-2021 at 11:44 AM. |
![]() |
![]() |
![]() |
#10 |
![]() Join Date: Feb 2010
Location: Ochlocknee, GA
Posts: 434
|
![]()
When I did my auto conversion I was using Fox weather boots to protect
my carpets. But I found that my left foot had no go place to rest. So I made a dead pedal out of aluminum and pop rivet it to the weather boot Now my left foot can rest and the carpets stay clean. John 1990 white/black #2546 one of a few 4L8OE Eq. ZR-1's http://www.zr1.net/forum/picture.php...pictureid=4490 |
![]() |
![]() |
![]() |
|
|