Door Window Removal Advice - ZR-1 Net Registry Forums

Jagdpanzer · 09-28-2018

Have to do some work on diver side window regulator. Anyone have some pointers on how to best remove the widow?

Sent from my iPhone using ZR-1 Net Registry

conesare2seconds · 09-28-2018

Following with interest. I need to repair or replace my DS regulator.

ZWILD1 · 10-11-2018

Either use the GM shop manual or you can buy a CD. Take some pics to help you remember how things are. Another suggestion is you probably can find a video on youtube of someone working on the C4 window regulator. While I have not had to do any repairs to my current car, I did remove both regulators from my sons 98 Trans Am to replace the electric window motors.

I made myself two window props out of some wood scraps with a U-shaped notch for the bottom of the glass and put rubber anti slip pads on the part that rest against the bottom of door. I did this to give myself some room inside of the door and so I didn't need to remove the window. If you have to mess with the bolts that hold the front and rear window tracks its best to mark their positions with a scribe or pencil.

09-28-2018	#1
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,659	Door Window Removal Advice Have to do some work on diver side window regulator. Anyone have some pointers on how to best remove the widow? Sent from my iPhone using ZR-1 Net Registry __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake

09-28-2018	#2
conesare2seconds Join Date: Jul 2016 Location: Greater St. Louis Posts: 489	Re: Door Window Removal Advice Following with interest. I need to repair or replace my DS regulator.

10-11-2018	#3
ZWILD1 Join Date: Aug 2004 Location: Spring Grove ,Pa. Posts: 256	Re: Door Window Removal Advice Either use the GM shop manual or you can buy a CD. Take some pics to help you remember how things are. Another suggestion is you probably can find a video on youtube of someone working on the C4 window regulator. While I have not had to do any repairs to my current car, I did remove both regulators from my sons 98 Trans Am to replace the electric window motors. I made myself two window props out of some wood scraps with a U-shaped notch for the bottom of the glass and put rubber anti slip pads on the part that rest against the bottom of door. I did this to give myself some room inside of the door and so I didn't need to remove the window. If you have to mess with the bolts that hold the front and rear window tracks its best to mark their positions with a scribe or pencil. __________________ 91 Turquoise Metallic Haibeck 525 #0134