ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 08-10-2012   #1
MrsMcNastys
 
Join Date: Jul 2012
Location: Somerset KY
Posts: 16
Default Secondary vacuum question

When checking the secondary vacuum pump and line going under the plenum for a vacuum leak, does that same line going to the plenum pull vacuum at idle ?...

i.e. at idle if disconnected the line has engine manifold vacuum, wondering if this indicates a bad reservoir or check valve? Or is that normal?

Ed
MrsMcNastys is offline   Reply With Quote
Old 08-10-2012   #2
MrsMcNastys
 
Join Date: Jul 2012
Location: Somerset KY
Posts: 16
Default Re: Secondary vacuum question

Sorry, line fitting disconnected near the oil cooler where you check pump vacuum and plenum line for leak-down.

I am guessing that the pump and vacuum reservoir is for the secondaries at WOT when manifold vacuum drops as just a reservoir by itself would be quickly depleted during a WOT run to top speed, I was just surprised that the manifold vacuum is not isolated from the pump ...

Ed
MrsMcNastys is offline   Reply With Quote
Old 08-10-2012   #3
Daniel_Mc
 
Daniel_Mc's Avatar
 
Join Date: Jan 2007
Location: Pineville, LA
Posts: 586
Default Re: Secondary vacuum question

Dynomite,

Thanks for posting that pic I am having an issue with the secondary system and was looking fro just that pic to make sure it was run correctly.

Daniel
Daniel_Mc is offline   Reply With Quote
Old 08-11-2012   #4
scottfab
 
scottfab's Avatar
 
Join Date: Jan 2009
Location: Portland Oregon metro area (Washington side)
Posts: 3,207
Default Re: Secondary vacuum question

Here is the manual schematic diagram of the vacuum system.
It clearly shows that you would feel vacuum at that point (when disconnected from the pump.

http://zr1.net/forum/album.php?album...pictureid=1351

When the engine is running this vacuum will shut off the air pump if everything is running properly.
__________________
Scott


Vett owner since 1979._It's about the car and the people

Last edited by scottfab; 08-11-2012 at 06:27 AM.
scottfab is offline   Reply With Quote
Old 08-11-2012   #5
Z51JEFF
 
Z51JEFF's Avatar
 
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,054
Default Re: Secondary vacuum question

Quote:
Originally Posted by MrsMcNastys View Post
When checking the secondary vacuum pump and line going under the plenum for a vacuum leak, does that same line going to the plenum pull vacuum at idle ?...

i.e. at idle if disconnected the line has engine manifold vacuum, wondering if this indicates a bad reservoir or check valve? Or is that normal?

Ed
Mine does pull a small amount of vacuum when disconnected from the pump,hope its normal.
Z51JEFF is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:36 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020