Shift Console Differences Between Years

[DallasZR-1]

The shift console in my '94 unfortunately broke during a radio install. It looks like 94/95 reproductions are no long available. Are there any significant differences between the 94/95 shift console and the 92/93 shift console?

This is the part I'm talking about.

https://www.corvettemods.com/C4-Corv...es_p_7122.html

[Bradjon]

I am not totally sure but I believe the only difference is the finish later ones had kind of a rubbery finish not sure when it changed hope that helps

[Corvette95]

I have a extremely minor blem 95 6speed console, there is a tiny chip beside the rear hatch button (not visable when lid is closed and not really visible when opened) I would sell , but there are NON to be had. One is listed on Ebay for $990.
PM email for pics if interested.90/91 same 92/93 same 94-96 same to the best of my knowledge.

[secondchance]

Originally Posted by DallasZR-1

The shift console in my '94 unfortunately broke during a radio install. It looks like 94/95 reproductions are no long available. Are there any significant differences between the 94/95 shift console and the 92/93 shift console?

This is the part I'm talking about.

https://www.corvettemods.com/C4-Corv...es_p_7122.html

Shifter bezels are not ZR1 specific.
90 and 91, I believe, are the same. I think (not positive) 92 and 93 are same (same as 90-91 but in rubberized black). 94, 95 and 96 are the same in black rubberized finish and the right edge rolls down unlike 90 to 93.

[PhillipsLT5]

read thru these threads about vendor
https://www.corvetteforum.com/forums...-feedback-153/

[GOLDCYLON]

Originally Posted by DallasZR-1

The shift console in my '94 unfortunately broke during a radio install. It looks like 94/95 reproductions are no long available. Are there any significant differences between the 94/95 shift console and the 92/93 shift console?

This is the part I'm talking about.

https://www.corvettemods.com/C4-Corv...es_p_7122.html

One of the WORST aftermarket companies to buy from. Non existent customer service After the sale. Only buy from them if you have ZERO alternatives. GC

[GOLDCYLON]

Originally Posted by secondchance

Shifter bezels are not ZR1 specific.
90 and 91, I believe, are the same. I think (not positive) 92 and 93 are same (same as 90-91 but in rubberized black). 94, 95 and 96 are the same in black rubberized finish and the right edge rolls down unlike 90 to 93.

They are NOT ZR-1 specific as stated above. 90 and 91 are the same 92-93 went to a black color vs grey and 94-96 was the model years that GM thought it would be a great idea to go with a black craptastic DULUSO rubberized coating that shows every scuff, Mark and scratch and Then melts and becomes sticky Goo if cleaned improperly over the years. GC

[We Gone]

Originally Posted by GOLDCYLON

They are NOT ZR-1 specific as stated above. 90 and 91 are the same 92-93 went to a black color vs grey and 94-96 was the model years that GM thought it would be a great idea to go with a black craptastic DULUSO rubberized coating that shows every scuff, Mark and scratch and Then melts and becomes sticky Goo if cleaned improperly over the years. GC

93 also has the crap coating, I just did a 93 and got the reproduction plate from one of the specialty shops, be aware the placement of the leather boot nut fasteners is not the same as the original.

Just one source.
https://www.corvettecentral.com/c4-8...6-speed-234327

[JThomas]

I would check with Mirrock Corvettes. They have been good in locating such parts.

[DallasZR-1]

All of this information was super helpful. Thank you again to this awesome community. That rubberized coating is TRULY craptastic.