![]() |
#1 |
Join Date: Jun 2013
Location: Toronto
Posts: 783
|
![]()
Don't think there is anything wrong with mine but since I've replaced most of the fuel system components I would really prefer to change it out with a quality replacement.
A few solutions I think are : 1. Aftermarket replacement which as many know are available from some parts stores. 2. Have custom fuel rails made that accept an fittings allowing an aftermarket replacement. 3. Modify the oem rails to accept an fittings also allowing an aftermarket regulator. The goal of course is just to have a quality replacement. Something adjustable doesn't hurt as it allows optimal fuel pressure settings etc. Any thoughts ? |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Aug 2006
Location: McLean, VA
Posts: 3,712
|
![]()
Option 1: I could have sworn that rockauto had non-oem alternative but I don't see them anymore on their website.
Option 2: anything is possible but most likely very costly. Option 3: probably doable but trick is making it look attractive. |
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Jul 2012
Location: Allentown, PA
Posts: 309
|
![]()
Lingenfelter used to sell adjustable regulators for our cars. Probably discontinued but can't hurt to check. If you zoom in on the attached photo, 1501933805631.jpg you can see mine.
Sent from my XT1254 using ZR-1 Net Registry mobile app
__________________
'95 ZR-1, aqua/gray, #167 368 LPE/Haibeck, Web cams, Stainless Works headers, B&B Fusion exhaust, 18" Fikse wheels, Alcon brakes, lowered. 491 SAE RWHP. |
![]() |
![]() |
![]() |
#4 |
![]() ![]() Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
![]()
I always check Jerry's Gaskets site first.
![]()
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
![]() |
![]() |
![]() |
#5 | |
![]() Join Date: Aug 2006
Location: McLean, VA
Posts: 3,712
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#6 | |
![]() Join Date: Jul 2009
Location: Texas
Posts: 793
|
![]() Quote:
Just out of curiosity does anyone have any close up pictures of one of their regulators?? David |
|
![]() |
![]() |
![]() |
#7 |
![]() Join Date: Jan 2015
Location: Marietta, GA USA
Posts: 1,160
|
![]()
Do the stock regulators go bad some times?
|
![]() |
![]() |
![]() |
#8 | |
![]() Join Date: Jul 2012
Location: Allentown, PA
Posts: 309
|
![]() Quote:
Sent from my XT1254 using ZR-1 Net Registry mobile app
__________________
'95 ZR-1, aqua/gray, #167 368 LPE/Haibeck, Web cams, Stainless Works headers, B&B Fusion exhaust, 18" Fikse wheels, Alcon brakes, lowered. 491 SAE RWHP. |
|
![]() |
![]() |
![]() |
#9 |
![]() Join Date: Aug 2006
Location: McLean, VA
Posts: 3,712
|
![]() |
![]() |
![]() |
![]() |
#10 | |
![]() Join Date: Jul 2009
Location: Texas
Posts: 793
|
![]()
Thank you Sir
Dave Quote:
|
|
![]() |
![]() |
![]() |
|
|