|
08-15-2024
|
#1 |
 Join Date: Jan 2024
Location: Boston, MA
Posts: 179
|
Time to remove/replace Stainless Works headers?
How long (measured in beers, time, swears, whatever...) does it take to get a set of Stainless Works headers out and back into the car? Do they drop out the bottom or go in the top? I am planning to weld a couple wide band O2 bungs into them. I have a 4-post lift and all the usual tools. I've already had the exhaust behind the headers out, so I can do that pretty quickly.
What gaskets are recommended to go back on with? Thank you. 
__________________
1987: Z51 Coupe, Z51, 4+3, Yellow / Graphite 1994: ZR-1 #150, Admiral Blue / Black 2015: Z06 Coupe, Z07, M7, Arctic White / Red |
|
|
|
08-17-2024
|
#2 | |
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,393
|
Re: Time to remove/replace Stainless Works headers?
Quote:
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
08-17-2024
|
#3 |
Join Date: Aug 2023
Location: Flanders, NJ
Posts: 36
|
Re: Time to remove/replace Stainless Works headers?
Ever do the swap? How bad was it?
__________________
[B]1990 ZR-1 #0115 Black with Grey Leather. [B Single Painted Top, with Electric AC. |
|
|
|
|
08-18-2024
|
#4 | |
|
Join Date: Jan 2024
Location: Boston, MA
Posts: 179
|
Re: Time to remove/replace Stainless Works headers?
Quote:
I've done other C4s and it wasn't too bad.
|
|
|
|
|
|
08-19-2024
|
#5 |
 
Join Date: Sep 2008
Location: Speedway, IN
Posts: 132
|
Re: Time to remove/replace Stainless Works headers?
|
|
|
|
|
08-26-2024
|
#6 |
|
Join Date: Aug 2023
Location: Flanders, NJ
Posts: 36
|
Re: Time to remove/replace Stainless Works headers?
Ok, I may tackle this in a year or so!
__________________
[B]1990 ZR-1 #0115 Black with Grey Leather. [B Single Painted Top, with Electric AC. |
|
|
|
|
08-30-2024
|
#7 |
|
Join Date: Jun 2013
Location: Toronto
Posts: 783
|
Re: Time to remove/replace Stainless Works headers?
with the exhaust off and under the car.. 10-15 mins per side. i pulled mine out and had them coated.. then wrapped. didnt like the wrap had them out in about the same time and took the wrap off. theres plenty of room and easy access
|
|
|
|
|
09-02-2024
|
#8 |
|
Join Date: Oct 2018
Location: Indiana
Posts: 61
|
Re: Time to remove/replace Stainless Works headers?
10-15 mins per side. You work on a nascar team. That is awesome. You are way faster than me!
|
|
|
|
|
09-02-2024
|
#9 |
 
Join Date: Jan 2010
Location: Mystic CT
Posts: 2,632
|
Re: Time to remove/replace Stainless Works headers?
10 - 15 minutes?
Using a smoke wrench? 😀 |
|
|
|
|
09-02-2024
|
#10 |
|
Join Date: Oct 2018
Location: Indiana
Posts: 61
|
Re: Time to remove/replace Stainless Works headers?
Just a detail question but does everyone get every bolt reinstalled on their headers? I hate exhaust leaks an my last Z 90 VIN 103 had a manifold leak that I would fit every two years. Some say that you can't get all exhaust bolts installed, but I disagree.
|
|
|
|
 |
|
|
Linear Mode
