Installing headers....block off EGR?

[zr1assassin]

Hey guys getting ready to install a set of headers(on 92'), do you have to block off the EGR? If so what's everyone using for an EGR block off plate?

[HAWAIIZR-1]

You don’t have EGR to worry about on MY 92. I believe only 93-95 MY does.


Sent from my iPhone using ZR-1 Net Registry

[zr1assassin]

Originally Posted by HAWAIIZR-1

You don’t have EGR to worry about on MY 92. I believe only 93-95 MY does.


Sent from my iPhone using ZR-1 Net Registry

Awesome! Thanks

[HAWAIIZR-1]

Originally Posted by zr1assassin

Awesome! Thanks

You’re welcome. There are some posts you’ll want to check out to help you out and make the mod go smoother. Good lessons learned here. Check with Paul Workman for oil dipstick bracket. There are thoughts about bolts to use and extensions or not for O2 sensors, etc. Dynomite (Cliff) will probably post his link to tips and tricks with how to. Best wishes.


Sent from my iPhone using ZR-1 Net Registry

[efnfast]

O2 sensor. Dipstick bracket. Steering column interference. Header bolts. Ceramic coating.

[zr1assassin]

Originally Posted by efnfast

O2 sensor. Dipstick bracket. Steering column interference. Header bolts. Ceramic coating.

I have to get the dipstick bracket and the O2 sensor extensions but I have header bolts, not ceramic coating them and the steering column interference can be handled with a hammer

[jss06c6]

I went with SW headers and exhaust. Only mod I needed to complete was to re - bend the oil dipstick tube and install O2 sensor extensions. You will, however, need to return to get your fuel maps correct.

Sent from my QTAIR7 using ZR-1 Net Registry mobile app

[Dynomite]

Originally Posted by HAWAIIZR-1

You’re welcome. There are some posts you’ll want to check out to help you out and make the mod go smoother. Good lessons learned here. Check with Paul Workman for oil dipstick bracket. There are thoughts about bolts to use and extensions or not for O2 sensors, etc. Dynomite (Cliff) will probably post his link to tips and tricks with how to. Best wishes.
Sent from my iPhone using ZR-1 Net Registry

Post 45 - Exhaust System Replace with Headers
Post 46 - Exhaust Headers Locking Bolt Tricks

[Ccmano]

Originally Posted by jss06c6

You will, however, need to retune to get your fuel maps correct.

Sent from my QTAIR7 using ZR-1 Net Registry mobile app

That part is important. Did headers on mine recently. Without cats it stunk to high heaven and backfired like crazy on deceleration. The retune eliminated the backfire, improved the stink (still there) and really improved power. I’m now adding cats back on.
H

[Jagdpanzer]

Originally Posted by Ccmano

I’m now adding cats back on.

Which cats did you decide to go with?