![]() |
#1 |
![]() Join Date: Nov 2011
Location: Dunbarton NH
Posts: 7,352
|
![]()
Ordered a set of replica A-molds from AFS.
http://shop.afswheels.com/AFS-ZR-1-W...im-Set-S7B.htm They were great to deal with, the rims look great and showed up on time. Just wanted to give a shout out for a job well done. -Steve ![]() Last edited by efnfast; 04-14-2015 at 02:35 PM. |
![]() |
![]() |
![]() |
#2 | |
![]() Join Date: Feb 2014
Location: AZ
Posts: 860
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Nov 2011
Location: Dunbarton NH
Posts: 7,352
|
![]()
I ordered the 36mm offset, and ASSUME that is what i received. I'll change the link.
Can't measure them right now, having a red pinstripe put on them. |
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Nov 2011
Location: Dunbarton NH
Posts: 7,352
|
![]()
Just checked the site. Uh-oh.
|
![]() |
![]() |
![]() |
#5 |
![]() Join Date: Nov 2011
Location: Dunbarton NH
Posts: 7,352
|
![]()
Now I need confirmation of offsets. I ordered the S7B's.
|
![]() |
![]() |
![]() |
#6 |
![]() Join Date: Jan 2012
Location: Wisconsin
Posts: 887
|
![]()
Good looking wheel.
How deep/wide is the polished lip?
__________________
1990 ZR-1 #2180 Red/Black Many of the usual mods for 460HP, tuned by Marc Haibeck ZR-1 Net Registry Member #1548 ![]() |
![]() |
![]() |
![]() |
#7 |
![]() Join Date: Nov 2006
Location: dayton,ohio
Posts: 425
|
![]()
The offset set is stamped on the back of the spoke as killshot mentioned. I've been running the 50mm with a spacer on the back because on the track, they will also fit on the front with no spacer. Handles great with 315's on the front!!
I check them for cracks after every event, and they seem to be holding up good. The black looks great also!
__________________
[FONT=Comic Sans MS][COLOR=red]"I wanna go fast!!"[/COLOR][/FONT] [FONT=Comic Sans MS][COLOR=#ff0000]-- Ricky Bobby[/COLOR][/FONT] |
![]() |
![]() |
![]() |
#8 | |
![]() ![]() Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
![]() Quote:
Steve, The "MR3" (Mountain Run 3) is looming, and it occurred to me the extra width on the front might be an edge I'd need to run you down at the MR3...except I hear now you're going to wimp out on us!!?( ![]() ![]()
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
![]() |
![]() |
![]() |
#9 |
![]() Join Date: Nov 2011
Location: Dunbarton NH
Posts: 7,352
|
![]()
Sorry Paul, ain't gonna make it this year. Really bummed. But, back to my wheels.
Looks like I ordered the wrong ones. I'm so pissed at myself. Somebody please confirm offsets for me so I can straighten this out. Anybody need a nice set of GS sized rims? -Steve |
![]() |
![]() |
![]() |
#10 |
![]() Join Date: Feb 2012
Location: Ledyard,CT
Posts: 8,110
|
![]()
How much?
|
![]() |
![]() |
![]() |
|
|