FX3 parts needed? - ZR-1 Net Registry Forums

RichS · 09-10-2016

In the middle of redoing the rear suspension and putting 4:10 gears in. While waiting for the speedo gears, I figured I'd look into the rear shocks. The po replaced the rear shocks with KYBs. I went fishing in the frame and found the actuators were there. I ordered 2 new rear shocks from E-shocks. I know I'm going to need the clips to mount the actuators, and I think mounting bushings. I see they sell a metal gear, Do the new ones come gears on them? Also the lights don't come on in the info cluster. Is there a certain fuse? I need to check if they disconnected the module or pulled the bulb yet.

Pics of the cleanup.

GOLDCYLON · 09-11-2016

Rich yes the small gears come with the shocks but you will be missing the clips as stated and the actuator cups as well that ride on top of the shocks that the actuators mate to. Hopefully the PO only pulled the lights for the FX-3 system from the DIC.

http://www.captainzcnc.com is a source for the actuator clips and you can see pictures there on that website of the cups that ride on top of the shock as well. They offer a actuator rebuild service and have great troubleshooting advise for checking out the system. I would email them to see if they have the cups.

DRM is were I was able to get upper and lower poly shock bushings http://dougrippie.com/
They still sell them I just checked for you. If your interested Rich I do have a spare set of Actuators (1 Front and 1 Rear) that work perfectly that also have the cups and the clips you need in my parts crib. They are used but in fine shape. Drop me PM if you are interested.

RichS · 09-11-2016

Pulled the dic and found the bulb and holder missing. I swapped it out with one off the top and checked the codes. There were 2 codes and they were for the rear shocks out of time, go figure.

So I need, bushings, clips and cups. And spare bulb holder for the dic..

Thanks!

GOLDCYLON · 09-11-2016

Well I have the clips the cups and the actuators. I was pretty sure the PO pulled the bulbs. I included the website for the upper and lower bushings. PM replied on Corvette Forum. GC

GOLDCYLON · 09-17-2016

Nope you posted it in Corvette Forum. thanks GC

09-10-2016	#1
RichS Join Date: Nov 2013 Location: Wilkes-Barre, PA Posts: 148	FX3 parts needed? In the middle of redoing the rear suspension and putting 4:10 gears in. While waiting for the speedo gears, I figured I'd look into the rear shocks. The po replaced the rear shocks with KYBs. I went fishing in the frame and found the actuators were there. I ordered 2 new rear shocks from E-shocks. I know I'm going to need the clips to mount the actuators, and I think mounting bushings. I see they sell a metal gear, Do the new ones come gears on them? Also the lights don't come on in the info cluster. Is there a certain fuse? I need to check if they disconnected the module or pulled the bulb yet. Pics of the cleanup. __________________ 1994 ZR-1 #198, sold [img]https://live.staticflickr.com/65535/48400173802_2a6f122cfb_n.jpg[/IMG] [COLOR=RoyalBlue]96 GrandSport#857[/COLOR],[COLOR=Red]Red Gut[/COLOR] 397 LT4, AFR heads,3:90 gears, DRM longtubes, Sepanek 700R4, Yank 3600, bla-bla... Best ET w/396 & 6-speed 11.02 @126.57 w/1.60 60' Best ET w/396 & 700r4 10.82 @124.87 w/1.48 60' 2003 DarkShadowGray Ford Lightning 460rwhp/550rwtq 12.11 @112.18 w/1.71 60'

09-11-2016	#2
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: FX3 parts needed? Rich yes the small gears come with the shocks but you will be missing the clips as stated and the actuator cups as well that ride on top of the shocks that the actuators mate to. Hopefully the PO only pulled the lights for the FX-3 system from the DIC. http://www.captainzcnc.com is a source for the actuator clips and you can see pictures there on that website of the cups that ride on top of the shock as well. They offer a actuator rebuild service and have great troubleshooting advise for checking out the system. I would email them to see if they have the cups. DRM is were I was able to get upper and lower poly shock bushings http://dougrippie.com/ They still sell them I just checked for you. If your interested Rich I do have a spare set of Actuators (1 Front and 1 Rear) that work perfectly that also have the cups and the clips you need in my parts crib. They are used but in fine shape. Drop me PM if you are interested. __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 09-11-2016 at 01:06 PM.

09-11-2016	#3
RichS Join Date: Nov 2013 Location: Wilkes-Barre, PA Posts: 148	Re: FX3 parts needed? Pulled the dic and found the bulb and holder missing. I swapped it out with one off the top and checked the codes. There were 2 codes and they were for the rear shocks out of time, go figure. So I need, bushings, clips and cups. And spare bulb holder for the dic.. Thanks! __________________ 1994 ZR-1 #198, sold [img]https://live.staticflickr.com/65535/48400173802_2a6f122cfb_n.jpg[/IMG] [COLOR=RoyalBlue]96 GrandSport#857[/COLOR],[COLOR=Red]Red Gut[/COLOR] 397 LT4, AFR heads,3:90 gears, DRM longtubes, Sepanek 700R4, Yank 3600, bla-bla... Best ET w/396 & 6-speed 11.02 @126.57 w/1.60 60' Best ET w/396 & 700r4 10.82 @124.87 w/1.48 60' 2003 DarkShadowGray Ford Lightning 460rwhp/550rwtq 12.11 @112.18 w/1.71 60'

09-11-2016	#4
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: FX3 parts needed? Well I have the clips the cups and the actuators. I was pretty sure the PO pulled the bulbs. I included the website for the upper and lower bushings. PM replied on Corvette Forum. GC __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 09-11-2016 at 09:18 PM.

09-17-2016	#5
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: FX3 parts needed? Nope you posted it in Corvette Forum. thanks GC __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V