Resurrection HOTB - Need Resources - ZR-1 Net Registry Forums

Corvettes White · 02-06-2013

Resurrection HOTB Need Resources

First a few details. The car is going to become a wide body. The donor car, a ’90, was hit in front, but the rear is a bit messed up also, luckily other than the doors, there is not much that I will need. Tyler, Brett. You have both been there.

Looking for any factory GM literature or documentation on how the 1989 Corvette was built. In particular:

The factory used a “Product Assembly Document” PAD book showing how the factory line was to put together the Corvette. I have heard that it runs about 3000 pages. I have a portion of this book related to the KOTH. But have never seen the whole book. I did make contact with one man back east that worked for GM. But he was not interesting in letting a copy of his PAD go except for way more money than I care to or can spend.

Anyone know where I may find a copy?.

Thanks in advance to all.

George

Blue Flame Restorations · 02-07-2013

George, I have a driver's side door. Not perfect but definitely good to use with very little work. Bottom rear corner needs stiffening up.

02-06-2013	#1
Corvettes White Join Date: Dec 2003 Posts: 477	Resurrection HOTB - Need Resources Resurrection HOTB Need Resources First a few details. The car is going to become a wide body. The donor car, a ’90, was hit in front, but the rear is a bit messed up also, luckily other than the doors, there is not much that I will need. Tyler, Brett. You have both been there. Looking for any factory GM literature or documentation on how the 1989 Corvette was built. In particular: The factory used a “Product Assembly Document” PAD book showing how the factory line was to put together the Corvette. I have heard that it runs about 3000 pages. I have a portion of this book related to the KOTH. But have never seen the whole book. I did make contact with one man back east that worked for GM. But he was not interesting in letting a copy of his PAD go except for way more money than I care to or can spend. Anyone know where I may find a copy?. Thanks in advance to all. George Last edited by Corvettes White; 02-06-2013 at 10:55 PM.

02-07-2013	#2
Blue Flame Restorations Join Date: Feb 2010 Location: Pendleton, IN Posts: 3,904	Re: Resurrection HOTB - Need Resources George, I have a driver's side door. Not perfect but definitely good to use with very little work. Bottom rear corner needs stiffening up. __________________ 1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project