ACCEL Injector WANTED - ZR-1 Net Registry Forums

XfireZ51 · 08-18-2014

Anyone have a spare injector they don't need. Specifically I am looking for the
ACCEL 150121 injector. I have a potential source that will test the injector to determine the offset. So far my playing w these values in the calibration has indicated a number of improvements in my motor:

1. Smoother idle
2. Better Fuel Economy
3. Reduction of drone at lower rpm

Altho the values I am currently using look to be much closer than precious, I still think they are not totally correct. I'd like to get some empirical confirmation and there's a source that has been building a database of injector offsets as well as other data. They have not tested the ACCEL injector yet.

Hog · 08-20-2014

Accel 150121 is available for $46 from Summit for a single in a worse case scenario.

Here is Accel's Fuel Injector Data page.
http://www.accel-ignition.com/fuel-i...specifications

But of course they dont list the stock flow rate 150121 21 lb/hr unit.

Perhaps step up to the 24 lb/hr unit. At least it has data.
The last time I bought a set of Accel injectors, there was an option to buy single injectors, sets of 8 injectors, and also sets of 8 injectors that were flow matched. I dont see the flow matched set availability, at least what I have looked at.

Lack of injector data is one of the issues of using non-OEM injectors.

Are the OEM 93-95 injectors that bad? Jerry sells the injector seals for $30-$40. Then the injector data would be spot on.

08-18-2014	#1
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,700	ACCEL Injector WANTED Anyone have a spare injector they don't need. Specifically I am looking for the ACCEL 150121 injector. I have a potential source that will test the injector to determine the offset. So far my playing w these values in the calibration has indicated a number of improvements in my motor: 1. Smoother idle 2. Better Fuel Economy 3. Reduction of drone at lower rpm Altho the values I am currently using look to be much closer than precious, I still think they are not totally correct. I'd like to get some empirical confirmation and there's a source that has been building a database of injector offsets as well as other data. They have not tested the ACCEL injector yet. __________________ [SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX Last edited by XfireZ51; 08-19-2014 at 05:49 PM.

08-20-2014	#2
Hog Join Date: Jul 2010 Location: Woodstock, Ontario, Canada Posts: 1,275	Re: ACCEL Injector WANTED Accel 150121 is available for $46 from Summit for a single in a worse case scenario. Here is Accel's Fuel Injector Data page. http://www.accel-ignition.com/fuel-i...specifications But of course they dont list the stock flow rate 150121 21 lb/hr unit. Perhaps step up to the 24 lb/hr unit. At least it has data. The last time I bought a set of Accel injectors, there was an option to buy single injectors, sets of 8 injectors, and also sets of 8 injectors that were flow matched. I dont see the flow matched set availability, at least what I have looked at. Lack of injector data is one of the issues of using non-OEM injectors. Are the OEM 93-95 injectors that bad? Jerry sells the injector seals for $30-$40. Then the injector data would be spot on. __________________ peace Paul ZR-1 Net Registry Member #1494