TB removal and then some!!! - Page 80 - ZR-1 Net Registry Forums

Roadster · 03-06-2022

Quote:

Originally Posted by Mystic ZR-1

Where does the fitting for the pre-luber screw in?
Hmm? Could an Accu-Sump be hooked up there, to have the benefit
of pre-oiling on every start up?

https://www.merlinmotorsport.co.uk/k...-they-work-281

Where the oil pressure sensor screws into...if you use your Z on a consistent basis....I would imagine that there wouldn't be any need for an Accu-Sump.....JMO....

Sent from my SM-G981U using ZR-1 Net Registry mobile app

Roadster · 03-06-2022

Need some info on removing the bolt from the front sway bar bracket that attaches to the LCA....this bolt won't budge either with electric impact or tapping the bolt out with a small sledge....so before I do any damage... does this bolt slide through the bushing sleeve...(which I'm thinking)...or is it threaded through....
thanks for any info....[emoji16][emoji16]20220306_195128.jpg

Sent from my SM-G981U using ZR-1 Net Registry mobile app

garyhugo · 03-07-2022

If that is the upper stabilizer bar insulator then yes it slides through the sleeve.

Roadster · 03-07-2022

Quote:

Originally Posted by garyhugo

If that is the upper stabilizer bar insulator then yes it slides through the sleeve.

That is the lower part of the bracket Gary....attached to the LCA and found out that it also slides out.... thanks...[emoji16][emoji16]

Sent from my SM-G981U using ZR-1 Net Registry mobile app

gtcollins@maxnet.co.nz · 03-09-2022

Get a cheap socket put the head of the bolt in the socket and hammer it once it starts to move you should be able to get it out the rest of the way

Sent from my SM-T865 using ZR-1 Net Registry mobile app

Roadster · 03-13-2022

Back on the ZR-1 this afternoon...
finally got the sway bar bracket removed....did a preliminary cleaning of the LCA and the bracket after a short soak....bracket is in for more soaking...getting there....20220313_165622.jpg 20220313_165658.jpg 20220313_170222.jpg 20220313_153741.jpg 20220313_153749.jpg 20220313_155641.jpg

Sent from my SM-G981U using ZR-1 Net Registry mobile app

Roadster · 03-16-2022

Can't tell you the number of times I have stripped...sanded and resprayed and then clear coated the plenum over the last almost 4 years..... I know I could have got it powder coated...but also like the feeling of do as much as I can myself....so after repainting the plenum months ago.... today I finally clear coated this piece once again....may not be perfect... but looks good enough to install...
also the LS sway bar bracket after soaking for a few days in Evapo-Rust....paint literally just wiped off....liking the bare metal finish. .especially in the comparison pics.....may leave as it and just clear coat....[emoji16][emoji16]20220316_115755.jpg 20220316_115741.jpg 20220316_122910.jpg 20220316_121026.jpg 20220316_121040.jpg

Sent from my SM-G981U using ZR-1 Net Registry mobile app

WARP TEN · 03-17-2022

This thread just hit 80 pages--Is this a Forum record? Been a fun thread to follow. --Bob

Roadster · 05-01-2022

Thanks Bob....it has been fun....[emoji16][emoji16]

Sent from my SM-G981U using ZR-1 Net Registry mobile app

Roadster · 05-01-2022

Been extremely busy recently...not totally ZR-1 related...as our "new" Yellow 74 Convertible came home last week...and our Brown 74 Convertible went down to GA for some engine work....which now leaves time to devote fully to the 94....always something going on....[emoji16][emoji16]
Pic #1....still need more cleaning and painting to finish....was thinking about removing the cam covers for painting....but might just tape everything off and paint them on the engine....
Pic #2.....our "new" 74 Convertible is home....while not cosmetically perfect....the L-82 is rebuilt and all new suspension in place....
Pic #3...our 74 LS4 454 loaded and now in GA for some engine work.... no return time frame...so now full concentration for the ZR-1....[emoji16][emoji16]20220501_102136.jpg 20220427_211739.jpg 20220427_054108.jpg

Sent from my SM-G981U using ZR-1 Net Registry mobile app

03-06-2022	#792
Roadster Join Date: Mar 2014 Location: Warrington PA Posts: 1,914	Re: TB removal and then some!!! Need some info on removing the bolt from the front sway bar bracket that attaches to the LCA....this bolt won't budge either with electric impact or tapping the bolt out with a small sledge....so before I do any damage... does this bolt slide through the bushing sleeve...(which I'm thinking)...or is it threaded through.... thanks for any info....[emoji16][emoji16]20220306_195128.jpg Sent from my SM-G981U using ZR-1 Net Registry mobile app __________________ Tom 1994 ZR-1 #009 "captured test fleet car" 1974 LS4 454 Vert 1974 L-82 355 Vert. 1982 L83 CFI...now a retired "dd"....Sold WAZOO Member

03-07-2022	#793
garyhugo Join Date: Feb 2010 Location: Jacksonville,FL Posts: 242	Re: TB removal and then some!!! If that is the upper stabilizer bar insulator then yes it slides through the sleeve. __________________ Gary 90-1572

03-09-2022	#795
gtcollins@maxnet.co.nz Join Date: Mar 2015 Location: New Zealand Posts: 385	Re: TB removal and then some!!! Get a cheap socket put the head of the bolt in the socket and hammer it once it starts to move you should be able to get it out the rest of the way Sent from my SM-T865 using ZR-1 Net Registry mobile app

03-13-2022	#796
Roadster Join Date: Mar 2014 Location: Warrington PA Posts: 1,914	Re: TB removal and then some!!! Back on the ZR-1 this afternoon... finally got the sway bar bracket removed....did a preliminary cleaning of the LCA and the bracket after a short soak....bracket is in for more soaking...getting there....20220313_165622.jpg 20220313_165658.jpg 20220313_170222.jpg 20220313_153741.jpg 20220313_153749.jpg 20220313_155641.jpg Sent from my SM-G981U using ZR-1 Net Registry mobile app __________________ Tom 1994 ZR-1 #009 "captured test fleet car" 1974 LS4 454 Vert 1974 L-82 355 Vert. 1982 L83 CFI...now a retired "dd"....Sold WAZOO Member

03-16-2022	#797
Roadster Join Date: Mar 2014 Location: Warrington PA Posts: 1,914	Re: TB removal and then some!!! Can't tell you the number of times I have stripped...sanded and resprayed and then clear coated the plenum over the last almost 4 years..... I know I could have got it powder coated...but also like the feeling of do as much as I can myself....so after repainting the plenum months ago.... today I finally clear coated this piece once again....may not be perfect... but looks good enough to install... also the LS sway bar bracket after soaking for a few days in Evapo-Rust....paint literally just wiped off....liking the bare metal finish. .especially in the comparison pics.....may leave as it and just clear coat....[emoji16][emoji16]20220316_115755.jpg 20220316_115741.jpg 20220316_122910.jpg 20220316_121026.jpg 20220316_121040.jpg Sent from my SM-G981U using ZR-1 Net Registry mobile app __________________ Tom 1994 ZR-1 #009 "captured test fleet car" 1974 LS4 454 Vert 1974 L-82 355 Vert. 1982 L83 CFI...now a retired "dd"....Sold WAZOO Member

03-17-2022	#798
WARP TEN Join Date: Apr 2007 Location: Lake Bluff, IL Posts: 2,090	Re: TB removal and then some!!! This thread just hit 80 pages--Is this a Forum record? Been a fun thread to follow. --Bob __________________ 2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough"

05-01-2022	#799
Roadster Join Date: Mar 2014 Location: Warrington PA Posts: 1,914	Re: TB removal and then some!!! Thanks Bob....it has been fun....[emoji16][emoji16] Sent from my SM-G981U using ZR-1 Net Registry mobile app __________________ Tom 1994 ZR-1 #009 "captured test fleet car" 1974 LS4 454 Vert 1974 L-82 355 Vert. 1982 L83 CFI...now a retired "dd"....Sold WAZOO Member

05-01-2022	#800
Roadster Join Date: Mar 2014 Location: Warrington PA Posts: 1,914	Re: TB removal and then some!!! Been extremely busy recently...not totally ZR-1 related...as our "new" Yellow 74 Convertible came home last week...and our Brown 74 Convertible went down to GA for some engine work....which now leaves time to devote fully to the 94....always something going on....[emoji16][emoji16] Pic #1....still need more cleaning and painting to finish....was thinking about removing the cam covers for painting....but might just tape everything off and paint them on the engine.... Pic #2.....our "new" 74 Convertible is home....while not cosmetically perfect....the L-82 is rebuilt and all new suspension in place.... Pic #3...our 74 LS4 454 loaded and now in GA for some engine work.... no return time frame...so now full concentration for the ZR-1....[emoji16][emoji16]20220501_102136.jpg 20220427_211739.jpg 20220427_054108.jpg Sent from my SM-G981U using ZR-1 Net Registry mobile app __________________ Tom 1994 ZR-1 #009 "captured test fleet car" 1974 LS4 454 Vert 1974 L-82 355 Vert. 1982 L83 CFI...now a retired "dd"....Sold WAZOO Member