1990 ZR-1 #2456 Original Components - Page 8 - ZR-1 Net Registry Forums

GOLDCYLON · 12-06-2022

That is awesome you will have it sorted out soon enough.

AirbusDriver · 12-07-2022

Spoke to Marc, today...what a pleasant, accommodating fellow! In the next couple days, the old car will start and run for the first time in 32 years. He expects no problems.
After that, the new lumbar bladders will be installed and the stereo system will be returned to new.
It has been such an excellent experience dealing with the guru from Chicagoland!

GOLDCYLON · 12-08-2022

Quote:

Originally Posted by AirbusDriver

Spoke to Marc, today...what a pleasant, accommodating fellow! In the next couple days, the old car will start and run for the first time in 32 years. He expects no problems.
After that, the new lumbar bladders will be installed and the stereo system will be returned to new.
It has been such an excellent experience dealing with the guru from Chicagoland!

I know where those seat bladders came. Happy for you !

AirbusDriver · 12-08-2022

Quote:

Originally Posted by GOLDCYLON

I know where those seat bladders came. Happy for you !

Yep👍
Thnx

AirbusDriver · 12-10-2022

Yesterday, #2456 ran for 1 hour with zero issues. The original sparkplugs were "like new" after a cleaning. The A/C works although a more comprehensive measure of A/C performance will be completed, next week. Seat bladders were replaced along with the seat back tilt worm gear in each seat.
Other than measure AC performance, the re-installation of the speaker amplifiers and the repair of the headlight motor gear cases are all that's left.

AirbusDriver · 12-13-2022

The car is ready to come home from Haibeck's. Marc says "it is as new again".
When he first started it, it blew a few generations of mouse nests, as well as a fair amount of acorns, out the pipes😁

AirbusDriver · 12-19-2022

Time to bring this thread to an end. Got the car back, today, from Haibeck's and it runs perfectly. Just as satisfying is, all the systems function as intended, including the seat bladders and stereo system.
Since the car has only traveled 62 miles in the last 32 years, I'll keep it as a time capsule. The next caretaker can do as they wish. In the meantime, it'll be kept in an excellent environment and started regularly. I hope to do the occasional NCRS/Bloomington type outings. Thanks for following along...

Corvette95 · 12-23-2022

Out of curiosity, did Marc take any pictures of the seat bladders when he changed them? Just wondering if they look like the rest of them even after no driving (basically turning into dust kinda like the headlamp nylon bushings)? BTW it looks great!

AirbusDriver · 12-23-2022

Marc sent the originals back to me and I'll keep them with the car. They are in a thousand pieces. I'll post a pic, later.

AirbusDriver · 12-23-2022

The remnants of my original 1990 seat bladders...

12-06-2022	#71
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: 1990 ZR-1 #2456 Original Components That is awesome you will have it sorted out soon enough. __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

12-07-2022	#72
AirbusDriver Join Date: Jul 2016 Location: Harrodsburg, KY Posts: 436	Re: 1990 ZR-1 #2456 Original Components Spoke to Marc, today...what a pleasant, accommodating fellow! In the next couple days, the old car will start and run for the first time in 32 years. He expects no problems. After that, the new lumbar bladders will be installed and the stereo system will be returned to new. It has been such an excellent experience dealing with the guru from Chicagoland!

12-10-2022	#75
AirbusDriver Join Date: Jul 2016 Location: Harrodsburg, KY Posts: 436	Re: 1990 ZR-1 #2456 Original Components Yesterday, #2456 ran for 1 hour with zero issues. The original sparkplugs were "like new" after a cleaning. The A/C works although a more comprehensive measure of A/C performance will be completed, next week. Seat bladders were replaced along with the seat back tilt worm gear in each seat. Other than measure AC performance, the re-installation of the speaker amplifiers and the repair of the headlight motor gear cases are all that's left.

12-13-2022	#76
AirbusDriver Join Date: Jul 2016 Location: Harrodsburg, KY Posts: 436	Re: 1990 ZR-1 #2456 Original Components The car is ready to come home from Haibeck's. Marc says "it is as new again". When he first started it, it blew a few generations of mouse nests, as well as a fair amount of acorns, out the pipes😁 Last edited by AirbusDriver; 08-24-2024 at 10:57 AM.

12-19-2022	#77
AirbusDriver Join Date: Jul 2016 Location: Harrodsburg, KY Posts: 436	Re: 1990 ZR-1 #2456 Original Components Time to bring this thread to an end. Got the car back, today, from Haibeck's and it runs perfectly. Just as satisfying is, all the systems function as intended, including the seat bladders and stereo system. Since the car has only traveled 62 miles in the last 32 years, I'll keep it as a time capsule. The next caretaker can do as they wish. In the meantime, it'll be kept in an excellent environment and started regularly. I hope to do the occasional NCRS/Bloomington type outings. Thanks for following along...

12-23-2022	#78
Corvette95 Join Date: Jan 2006 Location: Decatur, AL Posts: 1,119	Re: 1990 ZR-1 #2456 Original Components Out of curiosity, did Marc take any pictures of the seat bladders when he changed them? Just wondering if they look like the rest of them even after no driving (basically turning into dust kinda like the headlamp nylon bushings)? BTW it looks great! __________________ Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454