Fidanza users - Page 7 - ZR-1 Net Registry Forums

Jagdpanzer · 04-28-2018

Also had the skill saw noise with an aluminum flywheel install.
Valley drain tube making contact with the front side of the flywheel.

oricale · 04-29-2018

With the fidanza's I have installed, we have always had the rattle at idle. We have been working on something with fidanza to assist in the rattle without losing the performance factor. I do want to note a few things.

*The very nature of a non cammed/ cammed(esp) LT5 with a single mass flywheel is that it will rattle. Its one of the reasons GM used a dual mass with the robust Truck trans (ZF-series). However the extent if the rattle is different.
* Balancing is KEY with replacing the flywheel and clutch systems before installation(vibration ranges from about 2000-3800RPM)
* Phils advice in checking mating surfaces is SPOT ON, as we have found issues with mating surfaces, although it always caused a whine throughout the gears.
* My personal experience with rattle in the first 1800 RPM has been sparatic. I have had 2 91's do it slightly and a 95' that was pretty bad..(looking at my notes)
*RPM makes a trans oil/additive that apparently cuts down the racket..[emoji26]
*I do tell every customer that is interested in a aluminum flywheel to expect a bit of rattle..(esp if they are camming)
*Bill!...I am glad u were able to get the trans over to Bill B. I Would love a review of the trans after.

04-28-2018	#61
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,661	Re: Fidanza users Also had the skill saw noise with an aluminum flywheel install. Valley drain tube making contact with the front side of the flywheel. __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake

04-29-2018	#62
oricale Join Date: Oct 2011 Location: STAFFORD VA, Posts: 576	Re: Fidanza users With the fidanza's I have installed, we have always had the rattle at idle. We have been working on something with fidanza to assist in the rattle without losing the performance factor. I do want to note a few things. The very nature of a non cammed/ cammed(esp) LT5 with a single mass flywheel is that it will rattle. Its one of the reasons GM used a dual mass with the robust Truck trans (ZF-series). However the extent if the rattle is different. Balancing is KEY with replacing the flywheel and clutch systems before installation(vibration ranges from about 2000-3800RPM) * Phils advice in checking mating surfaces is SPOT ON, as we have found issues with mating surfaces, although it always caused a whine throughout the gears. * My personal experience with rattle in the first 1800 RPM has been sparatic. I have had 2 91's do it slightly and a 95' that was pretty bad..(looking at my notes) RPM makes a trans oil/additive that apparently cuts down the racket..[emoji26] I do tell every customer that is interested in a aluminum flywheel to expect a bit of rattle..(esp if they are camming) Bill!...I am glad u were able to get the trans over to Bill B. I Would love a review of the trans after. __________________ [B][I][COLOR=red]1990 ZR1[/COLOR][COLOR=black] [U]#00077 [COLOR=red]RED[/COLOR]/[COLOR=red]RED[/COLOR] (10Y022 PEP CAR) [/U][/COLOR][/I][/B][B][I][COLOR=red]1991 ZR1[/COLOR][COLOR=black] [U]#00517 ("Irene")[COLOR=red]WHITE[/COLOR]/[COLOR=red]RED-SOLD:cry:[/COLOR] [B][/B] [/U][/COLOR][/I][/B][B][I][COLOR=red]1992 ZR1[/COLOR][COLOR=black] [U]#00445("The Revenant")[COLOR=red][COLOR="Black"]BLACK [/COLOR][/COLOR]/[COLOR=red]RED(2016 T.O.D!) [/COLOR] [/U][/COLOR][/I][/B] [B][I][COLOR=red]2009 [COLOR=red]Z06!![COLOR=black]BLK/BLK rare Linen interior[/COLOR] 707HP!![/COLOR] [/COLOR][/I][/B] [B][I][COLOR=red]2006[/COLOR] BLK/BLK Z51 (Just SICK FAST!)SOLD)[/I][/B] [B][I]1996 BLK/BLK LT4 Grnsprt(sold...Twice!)[/I][/B] [B][I]1991 RED/REDL98(Fell off the shipping truck:([/I][/B] [B][I]1980 BLK/RED L82(Sold)[/I][/B] [B][I][B][I]1990[/I][/B] RED/BLK(sold.....In Japan)[/I][/B] [I][COLOR=black][B][I]2006[/I][/B][/COLOR][/I] [COLOR=red]Mustang GT[/COLOR] ([B][I]mach 1[/I][/B])[B](sold)[/B] [COLOR=black][B][I]1969[/I][/B][/COLOR] [COLOR=red]Mach[/COLOR] [B][I]1(sold in Japan)[/I][/B] [COLOR=black][B][I]1969[/I][/B][/COLOR] [COLOR=red]Mach[/COLOR] [B][I]1#2(sold)[/I][/B] [B][I]WAZOO Member...[/I][/B] [url]www.evolution-motorsport.com[/url] facebook/evolutionmotorsportengineering Your Local [url]www.Amsoil.com[/url] dealer/user.. Victory Loves Preparation* Last edited by oricale; 05-01-2018 at 10:26 AM.