03-20-2017 | #51 |
Join Date: Aug 2014
Location: Kansas City, MO
Posts: 838
|
Re: ECM And Ignition Module Availability/ replacement
LSx computer or MegaSquirt with CNP module or use late model Cayenne/928 COP coils. Thing is getting it to talk to CCM and BCM, etc.
__________________
Looking for a ZR-1 1985 Yamaha RZ350-NOT STOCK 1971 Yamaha AT1-Middle of a restoration |
03-20-2017 | #52 |
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,385
|
Re: ECM And Ignition Module Availability/ replacement
Still working on it. We hit a long delay when one of the sub-contractors was obligated on another project. Back on the project now and making steady progress. One of the more obvious challenges in the initial phase is developing the receiver connectors that are molded into the OE DIS. The priority for electrical connectors is to make it all the same as the OE DIS within cost feasibility parameters. The 14 pin connector would be better if the female side was on a wire lead of about 6" in length, so that has been taken into account.
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
03-20-2017 | #53 | |
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,385
|
Re: ECM And Ignition Module Availability/ replacement
Quote:
Our objective is direct replacement of the OE DIS Module, without modifications in consideration of cost affordability & justification.
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
03-20-2017 | #54 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,152
|
Re: ECM And Ignition Module Availability/ replacement
I will say I did reach out to a few individuals I know at Continental that were there when it was Motorola Telematics and Motorola Automotive. Being the design was in the late 80's and the acquisitions along the way I am quite sure the original designs are long gone or sitting in the bottom of a box somewhere..
Also I know they are not in any of the buildings they were in when it was Motorola Automotive division, so my best guess is any Motorola documentation has been shredded.. I did try though.. to add: one guy I knew remembered the project but wasn't part of it. He felt it was like finding a needle in a haystack
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
07-25-2017 | #55 |
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,385
|
Re: ECM And Ignition Module Availability/ replacement
Project in Progress
Update The following image is the prototype circuit board and billet enclosure. It may take several more months to complete the prototype module & actual engine dyno testing, before beta test units are placed in the field.
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
07-25-2017 | #56 |
Join Date: Dec 2003
Location: Grand Island NE
Posts: 1,510
|
Re: ECM And Ignition Module Availability/ replacement
__________________
Dennis Fierstein 90 ZR-1 #2562 Atomic-Z ZR-1 Net Registry Chairman of the Board ZR-1 Net Registry Treasurer |
07-25-2017 | #57 |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,698
|
Re: ECM And Ignition Module Availability/ replacement
Jerry,
Can u outline any of the functional specs on this? Is this strictly a direct replacement or does it incorporate any enhamcements? Is there a price point?
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX |
07-25-2017 | #58 | ||||
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,385
|
Re: ECM And Ignition Module Availability/ replacement
Quote:
Quote:
Quote:
Quote:
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
||||
07-25-2017 | #59 |
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,153
|
Re: ECM And Ignition Module Availability/ replacement
Great work Jerry keep it up. GC
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
07-25-2017 | #60 |
Join Date: Aug 2005
Location: Northridge, CA
Posts: 1,457
|
Re: ECM And Ignition Module Availability/ replacement
Thank you, Jerry!
|
|
|