10-29-2015 | #51 |
Join Date: Aug 2014
Location: Trois-Rivieres (QC)
Posts: 473
|
Re: Stalling issues - Code 31 (Camshaft Position Sensor)
Thanks vilant, I will receive my cam sensor next week, if my stalling issue is still fixed by then and if after the new cam sensor is installed I still got the Code 31, I'll have to think ECM.
But I guess good luck finding a ECM somewhere... |
10-29-2015 | #52 |
Join Date: Aug 2014
Location: Trois-Rivieres (QC)
Posts: 473
|
Re: Stalling issues - Code 31 (Camshaft Position Sensor)
Alright stalling issue is definitely fixed now, another 10 miles without the problem.
BUT. The SES light comes on way more often. |
10-29-2015 | #53 |
Join Date: Aug 2014
Location: Trois-Rivieres (QC)
Posts: 473
|
Re: Stalling issues - Code 31 (Camshaft Position Sensor)
I've red that on another forum...
Strange enough, alternator failed last week (changed by a new one). Do you think I can simply clear the code...? If so, how do I do that? |
10-29-2015 | #54 |
Join Date: Jun 2015
Location: Texas
Posts: 530
|
Re: Stalling issues - Code 31 (Camshaft Position Sensor)
When my cam sensor went out it acted just like your car. I think once you change the sensor you will be OK. In general ECM failures are rare.
|
10-29-2015 | #55 |
Join Date: Aug 2014
Location: Trois-Rivieres (QC)
Posts: 473
|
Re: Stalling issues - Code 31 (Camshaft Position Sensor)
|
10-29-2015 | #56 | |
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
|
Re: Stalling issues - Code 31 (Camshaft Position Sensor)
Quote:
ALDL Fault Code Reader/Eraser on CF. |
|
10-29-2015 | #57 | |
Join Date: Aug 2014
Location: Trois-Rivieres (QC)
Posts: 473
|
Re: Stalling issues - Code 31 (Camshaft Position Sensor)
Quote:
|
|
10-30-2015 | #58 |
Join Date: Aug 2014
Location: Trois-Rivieres (QC)
Posts: 473
|
Re: Stalling issues - Code 31 (Camshaft Position Sensor)
I erased the code 31 by unplugging the battery 10 seconds - never came back after a 200 miles ride today.
Stalling issue happened twice, map sensor hose was still too long and bent a bit - cut it again. Hope it fixed the issue for good. |
10-31-2015 | #59 | |
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,393
|
Re: Stalling issues - Code 31 (Camshaft Position Sensor)
Quote:
Here is what it's supposed to look like.
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
10-31-2015 | #60 |
Join Date: Aug 2014
Location: Trois-Rivieres (QC)
Posts: 473
|
Re: Stalling issues - Code 31 (Camshaft Position Sensor)
The answer to my stalling issue is that hose for sure Jerry so I will look into that.
Thanks a lot! |
|
|