Delamination Poll - Page 6 - ZR-1 Net Registry Forums

JThomas · 09-07-2013

My 1995, #152 has it, but the windshield is from an earlier model. (Wide radar cutout)

The car was a GM Proving Grounds car, so who knows if the windshield was replaced in its past or what.

Vetman · 09-07-2013

Jonszr1. You are lucky BECAUSE you have 2 zr-1's.

dredgeguy · 10-23-2013

My 92 has delamination around the edges

TheBlackPearl · 10-23-2013

None on my 90.

8cam · 10-23-2013

90 with just a little in the upper drivers corner.

JFFerner · 01-23-2014

My '90 has been replaced once already and is dellaminating around the edges again.

USAZR1 · 02-12-2014

Our 94 has just a small amount in the upper drivers corner.

trobey · 02-13-2014

Minor delamination around top edges of the windshield
1993 black/black #0047 w/7500 miles
Tom

Paul Workman · 11-19-2015

All delam?

My 90 had about 1.5 to 2.0" of delam around the periphery. In 2014 I replaced it with a standard C4 (Safelite) windshield.

What I immediately noticed was the clarity of the new glass; not just the absence of the typical delamination at the periphery, but clarity was remarkable by comparison - especially when facing the sun.

I suppose there might have been a couple decades of micro scratches (like patina) on the glass, but it wasn't due to not being clean. (I'm fanatical about clean glass; the photographer in me, I guess...).

Just my .02, but unless you are harboring an NCRS candidate, I would recommend to anyone to consider changing out the ZR-1 glass if it is the least bit annoying. I love the (clear) look, and the tinting is perfect (for me). I've not missed that original glass for a friggin' microsecond. LOVE the new 'winder'!

FWIW, YMMV!

Dynomite · 11-19-2015

Quote:

Originally Posted by Paul Workman

All delam?

Just my .02, but unless you are harboring an NCRS candidate, I would recommend to anyone to consider changing out the ZR-1 glass if it is the least bit annoying. I love the (clear) look, and the tinting is perfect (for me). I've not missed that original glass for a friggin' microsecond. LOVE the new 'winder'!

FWIW, YMMV!

This is what I call DELAMINATION

Got a new windshield on the way.

But my Heater Core Leak looked about as bad except rather than DELAMINATION it was FOG

View Poll Results: Delamination Poll
I have a 1990 with NO delamination	83	21.67%
I have a 1990 with delamination	62	16.19%
I have a 1991 with NO delamination	25	6.53%
I have a 1991 with delamination	84	21.93%
I have a 1992 with NO delamination	6	1.57%
I have a 1992 with delamination	29	7.57%
I have a 1993 with NO delamination	5	1.31%
I have a 1993 with delamination	22	5.74%
I have a 1994 with NO delamination	6	1.57%
I have a 1994 with delamination	24	6.27%
I have a 1995 with NO delamination	7	1.83%
I have a 1995 with delamination	30	7.83%
Voters: 383. You may not vote on this poll

09-07-2013	#51
JThomas Join Date: May 2008 Location: Okemos, MI. Posts: 1,190	Re: Delamination Poll My 1995, #152 has it, but the windshield is from an earlier model. (Wide radar cutout) The car was a GM Proving Grounds car, so who knows if the windshield was replaced in its past or what. __________________ Joe Thomas Corvette Club of Michigan NCRS-Michigan Chapter Member NCM Master Ambassador NCM Lifetime Member Former NCM Board Member 1991 ZR-1 Melon Copper Metallic/Black 1992 ZR-1 Bright Red/Black (Sold) 1995 ZR-1 Bright Aqua/Gray (Sold) 2012 ZR1 Super Sonic Blue / Dark Titanium

09-07-2013	#52
Vetman Join Date: Feb 2013 Location: Yakima Washington Posts: 404	Re: Delamination Poll Jonszr1. You are lucky BECAUSE you have 2 zr-1's. __________________ Jim 1990 Z # 2441 1959 c-1 230 HP 4 speed frost blue/silver 3 owner 2011 cts-v 556 HP, manual 6 speed 1955 chev 2dr ht PP 265 3 speed w/OD

10-23-2013	#53
dredgeguy Join Date: Aug 2012 Location: Ellicott City, MD Posts: 1,715	Re: Delamination Poll My 92 has delamination around the edges __________________ Charlie __________ Dredgeguy WAZOO Member 1992 Bright Red/Black ZR1 #246 Dana 4:10 gears Polished LT5 by Haibeck Polished Fikse FM5's with Michelin Pilot Sport 2 Stainless Works headers and cats with Corsa

10-23-2013	#54
TheBlackPearl Join Date: Oct 2013 Location: NJ Posts: 50	Re: Delamination Poll None on my 90.

10-23-2013	#55
8cam Join Date: Jul 2013 Location: Atlanta Posts: 450	Re: Delamination Poll 90 with just a little in the upper drivers corner.

01-23-2014	#56
JFFerner Join Date: Jan 2012 Location: Dallastown, PA Posts: 189	Re: Delamination Poll My '90 has been replaced once already and is dellaminating around the edges again.

02-12-2014	#57
USAZR1 Join Date: Oct 2013 Location: Wichita Falls,Tx Posts: 594	Re: Delamination Poll Our 94 has just a small amount in the upper drivers corner.

02-13-2014	#58
trobey Join Date: Feb 2014 Location: Hubbard, Ohio 44425 Posts: 13	Re: Delamination Poll Minor delamination around top edges of the windshield 1993 black/black #0047 w/7500 miles Tom

11-19-2015	#59
Paul Workman Join Date: Nov 2007 Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri Posts: 6,466	Re: Delamination Poll All delam? My 90 had about 1.5 to 2.0" of delam around the periphery. In 2014 I replaced it with a standard C4 (Safelite) windshield. What I immediately noticed was the clarity of the new glass; not just the absence of the typical delamination at the periphery, but clarity was remarkable by comparison - especially when facing the sun. I suppose there might have been a couple decades of micro scratches (like patina) on the glass, but it wasn't due to not being clean. (I'm fanatical about clean glass; the photographer in me, I guess...). Just my .02, but unless you are harboring an NCRS candidate, I would recommend to anyone to consider changing out the ZR-1 glass if it is the least bit annoying. I love the (clear) look, and the tinting is perfect (for me). I've not missed that original glass for a friggin' microsecond. LOVE the new 'winder'! FWIW, YMMV!