ECM Issues - No Start - Page 5 - ZR-1 Net Registry Forums

Macroblock · 09-27-2020

Just an update to provide this link on troubleshooting the C4-ZR1-ECM:

http://zr1ecm.com/youfix.html

-=Jeff=- · 09-27-2020

Nice. Will you be going into more detail on the internals of the ECM? I have one I need to fix, I should probably pull it apart and look at the solder joints first.

Lastly these are conformal coated aren't they, what is the best way to remove the coating to get to the pins?

Macroblock · 10-03-2024

I normally use Acetone on a Q-Tip to remove the Conformal from the pins.

09-27-2020	#41
Macroblock Join Date: May 2020 Location: Windsor Posts: 39	Re: ECM Issues - No Start Just an update to provide this link on troubleshooting the C4-ZR1-ECM: http://zr1ecm.com/youfix.html

09-27-2020	#42
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: ECM Issues - No Start Nice. Will you be going into more detail on the internals of the ECM? I have one I need to fix, I should probably pull it apart and look at the solder joints first. Lastly these are conformal coated aren't they, what is the best way to remove the coating to get to the pins? __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

10-03-2024	#43
Macroblock Join Date: May 2020 Location: Windsor Posts: 39	ECM Issues - No Start I normally use Acetone on a Q-Tip to remove the Conformal from the pins.