Which oil filter do you use? - Page 5 - ZR-1 Net Registry Forums

LancePearson · 02-27-2013

I just bought two of the Napa 1324 Wix filters yesterday for my future oil changes. They looked them up and their data said they have the check valve as reported and a 16 pound bypass pressure. Most of the things I've bought from Napa are reasonable performers for the l48 1976's engine and now this one. Followed Marc's rec.

Schrade · 03-18-2013

Isn't this mill (LT5) bulletproof?

Seems that if you do the oil & filter change every 3k, or 3 months, whichever comes FIRST , then even a budget filter will get the job done... (unless the hammer stays on the floor for track use).

I owned a fleet for courier & delivery that I ran, and did the O/C about every 10 days for all of them, for many years, which was roughly, 3k, and all the vehicles kept a good squeeze under the heads. The last one, an Express 1-ton 5.7 bought new '02 as my own personal, had ZERO squeeze loss @ 205k...

LancePearson · 03-18-2013

just out of curiosity when you reset the oil change on the dashboard, how many miles before it comes on saying to change? My 2008 TBSS calculates oil wear so it's not miles at all. How does this one work, straight miles or sensors inputs for varied use?

Manual did not say as far as I can tell.
Lance

scottfab · 04-08-2013

Quote:

Originally Posted by LancePearson

just out of curiosity when you reset the oil change on the dashboard, how many miles before it comes on saying to change? My 2008 TBSS calculates oil wear so it's not miles at all. How does this one work, straight miles or sensors inputs for varied use?

Manual did not say as far as I can tell.
Lance

3k miles.
Page 0B-2 Figure 1 Item # 1

XfireZ51 · 09-10-2014

I use the AC PF970 with oil change every 2000 miles.

Paul Workman · 11-04-2014

Quote:

Originally Posted by XfireZ51

I use the AC PF970 with oil change every 2000 miles.

Every 2000 miles on an oil change? Is that something you do once in the spring/start of the new driving season as a matter of routine, or ??? Just curious why the cadence is so high. Even in the DINO OIL days, 3000 miles was the norm, and that was with a 5 quart oil pan; including the filter. With full synthetic it is much higher - e.g., 5k and then some, depending on application.

XfireZ51 · 11-25-2014

Quote:

Originally Posted by Paul Workman

Every 2000 miles on an oil change? Is that something you do once in the spring/start of the new driving season as a matter of routine, or ??? Just curious why the cadence is so high. Even in the DINO OIL days, 3000 miles was the norm, and that was with a 5 quart oil pan; including the filter. With full synthetic it is much higher - e.g., 5k and then some, depending on application.

Paul,

The oil changes pretty much coincide w the driving season. I always change the oil for the winter. When I am getting ready for a long drive and/or racing situation as in going to BG, I change the oil prior to that event. The Castrol GTX I use is not SYNTH oil. I usually throw in 8-9 quarts/change w filter.

WB9MCW · 11-19-2015

"We also found that the NAPA 1324 filter retains eight ounces of oil after the engine is off for 24 hours. The filter is white in color and is made by WIX."

The above is from the H site oil filter recommendations page - Color is off but this is the one I use. Good price as well.

FU · 12-05-2015

Quote:

Originally Posted by WB9MCW

"We also found that the NAPA 1324 filter retains eight ounces of oil after the engine is off for 24 hours. The filter is white in color and is made by WIX."

The above is from the H site oil filter recommendations page - Color is off but this is the one I use. Good price as well.

I have been using the 1324 for a while now. Thing is sometimes we get a 1324 that doesn't hold oil in it overnight.

msorenso · 05-08-2017

ACDELCO

View Poll Results: Which oil filter do you use?
AC Delco	68	27.42%
Amsoil	1	0.40%
Baldwin	0	0%
Bosch	66	26.61%
Fram	13	5.24%
K&N	12	4.84%
Mobil 1	54	21.77%
Napa	12	4.84%
Penske	0	0%
Pennzoil	1	0.40%
PowerFlo	1	0.40%
ProLine	0	0%
Purolator	3	1.21%
Quaker State	0	0%
STP	0	0%
Wix	17	6.85%
Voters: 248. You may not vote on this poll

02-27-2013	#41
LancePearson Join Date: Dec 2012 Location: Chester, Virginia Posts: 457	Re: Which oil filter do you use? I just bought two of the Napa 1324 Wix filters yesterday for my future oil changes. They looked them up and their data said they have the check valve as reported and a 16 pound bypass pressure. Most of the things I've bought from Napa are reasonable performers for the l48 1976's engine and now this one. Followed Marc's rec. __________________ Lance Pearson Chester, Virginia [COLOR=red][I]'76 L48 four speed[/I][/COLOR] [COLOR=red][I]'91 ZR-1 #00682[/I][/COLOR] Net Registry #1461

03-18-2013	#42
Schrade Join Date: Dec 2012 Location: NC Posts: 1,786	Re: Which oil filter do you use? Isn't this mill (LT5) bulletproof? Seems that if you do the oil & filter change every 3k, or 3 months, whichever comes FIRST , then even a budget filter will get the job done... (unless the hammer stays on the floor for track use). I owned a fleet for courier & delivery that I ran, and did the O/C about every 10 days for all of them, for many years, which was roughly, 3k, and all the vehicles kept a good squeeze under the heads. The last one, an Express 1-ton 5.7 bought new '02 as my own personal, had ZERO squeeze loss @ 205k... __________________ I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG]

03-18-2013	#43
LancePearson Join Date: Dec 2012 Location: Chester, Virginia Posts: 457	Re: Which oil filter do you use? just out of curiosity when you reset the oil change on the dashboard, how many miles before it comes on saying to change? My 2008 TBSS calculates oil wear so it's not miles at all. How does this one work, straight miles or sensors inputs for varied use? Manual did not say as far as I can tell. Lance __________________ Lance Pearson Chester, Virginia [COLOR=red][I]'76 L48 four speed[/I][/COLOR] [COLOR=red][I]'91 ZR-1 #00682[/I][/COLOR] Net Registry #1461

09-10-2014	#45
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,704	Re: Which oil filter do you use? I use the AC PF970 with oil change every 2000 miles. __________________ [SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX

11-19-2015	#48
WB9MCW Join Date: Dec 2003 Location: McHenry, Il. Posts: 6,607	Re: Which oil filter do you use? "We also found that the NAPA 1324 filter retains eight ounces of oil after the engine is off for 24 hours. The filter is white in color and is made by WIX." The above is from the H site oil filter recommendations page - Color is off but this is the one I use. Good price as well. __________________ http://i119.photobucket.com/albums/o...9mcw/SIG-2.jpg http://i119.photobucket.com/albums/o128/wb9mcw/vcm.gif "The Budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed, lest Rome will become bankrupt. People must again learn to work instead of living on public assistance." - Cicero, 55 BC " We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution." - Abraham Lincoln

05-08-2017	#50
msorenso Join Date: Apr 2013 Location: South Dakota Posts: 85	Re: Which oil filter do you use? ACDELCO __________________ Dr. Pete "Frankenstein's" Ported and Polish combo Cam retiming & Chip Tune Corsa Exhaust No Cat SW Stainless Long Tube Headers MSD Coils DRM Coil Overs Hurst Shifter ZF Doc Beam Plates Center Force Dual Friction