ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 05-07-2019   #41
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,152
Default Re: Code 41 = new ECM?

Quote:
Originally Posted by Weeberone View Post
Yes, under category 1 I get a C12 then the 3 dashes - - - then under category 4 I get H41 then the 3 dashes - - -.

To you, that indicates a healthy ECM?
C refers to CURRENT Codes

H refers to HISTORY Codes

I think you have no active codes.. if it was a C41, then I would be a bit more concerned..

What are the symptoms you are seeing?
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 05-08-2019   #42
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,697
Default Re: Code 41 = new ECM?

So the 90’s show ECM malf codes on the cluster not the DIC?
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is online now   Reply With Quote
Old 05-08-2019   #43
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,152
Default Re: Code 41 = new ECM?

Both, depends how you are checking it..
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 05-08-2019   #44
Weeberone
 
Join Date: May 2018
Location: Nanaimo BC
Posts: 61
Default Re: Code 41 = new ECM?

Quote:
Originally Posted by -=Jeff=- View Post
C refers to CURRENT Codes

H refers to HISTORY Codes

I think you have no active codes.. if it was a C41, then I would be a bit more concerned..

What are the symptoms you are seeing?
Does it matter if it’s running or not? I check with it not running.

When it is running it idles at about 2000 rpm and stumbles and dies if you try to drive.
__________________
1990 Red/Saddle #1521
Weeberone is offline   Reply With Quote
Old 05-08-2019   #45
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,152
Default Re: Code 41 = new ECM?

C41 will not cause a stumble and die.. I did a 1991 dash in a 1989 and tried to use a 1992 CCM, it would not work and I had a Code 41 (Active) but yet i could drive the car.. no issues

I ended up with a 1991 CCM to fix the issue, however.. I think you are looking in the wrong spot for the issue you are having
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 05-08-2019   #46
Ccmano
 
Ccmano's Avatar
 
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
Default Re: Code 41 = new ECM?

We are focused on the ECM and Memcal here, but these symptoms sound an awful lot like a vacuum line off on the MAP sensor or even a bad MAP sensor. Have you checked the MAP sensors?
H
__________________
90'ZR-1 #1461 Red/Black
Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold
08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold
05 C6 Z51 Red/Black Sold
90'ZR-1 #1723 Black/Gray Sold but not forgotten
91' Z51 L98 White Vert. My First, you always remember your first. Sold.
Ccmano is offline   Reply With Quote
Old 05-08-2019   #47
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,697
Default Re: Code 41 = new ECM?

Well if its an ECM MALF then it would cause the issue he is experiencing.
Basically its defaulting to limp home mode.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is online now   Reply With Quote
Old 05-08-2019   #48
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,152
Default Re: Code 41 = new ECM?

Quote:
Originally Posted by XfireZ51 View Post
Well if its an ECM MALF then it would cause the issue he is experiencing.
Basically its defaulting to limp home mode.
It's not.. he sadi Module 1 is C12 ( that is ECM

Module 4 is H41, that is CCM

HE has another issue, not ECM related in my opinion..
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 05-08-2019   #49
Weeberone
 
Join Date: May 2018
Location: Nanaimo BC
Posts: 61
Default Re: Code 41 = new ECM?

Quote:
Originally Posted by -=Jeff=- View Post
It's not.. he sadi Module 1 is C12 ( that is ECM

Module 4 is H41, that is CCM

HE has another issue, not ECM related in my opinion..
I thought module 4 was ECM as it reads “Err” when not communicating with the CCM, which it was doing when this started. That went away after cleaning contacts.

The vacuum hose is still attached to the MAP sensor.
__________________
1990 Red/Saddle #1521
Weeberone is offline   Reply With Quote
Old 05-08-2019   #50
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,152
Default Re: Code 41 = new ECM?

just checked the FSM.. yes.. 1 is CCm 4 is ECM

Error is 41 Cylinder Select

see diagnostic pages attached
Attached Images
File Type: png ECM- C41a.PNG (64.1 KB, 52 views)
File Type: png ECM- C41.PNG (31.0 KB, 31 views)
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:13 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020