![]() |
#41 | |
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,057
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#42 |
![]() Join Date: Apr 2007
Location: Northern VA
Posts: 2,653
|
![]()
The alternative cam position sensor arrived today. Had to make some modification to it so it would fit in cylinder head in place of the OEM stock sensor. Here it is beneath the OEM sensor:
![]() Fit was identical to the OEM sensor. ![]() Same 1mm camshaft reluctor wheel clearance as with the OEM sensor. ![]() Did some bench testing by installing in a head and turning the cam by hand and it generated the same signal output as the OEM sensor. Facing slot ![]() Facing wheel ![]() Looking very promising so far. Next up full scale testing in the car.
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
![]() |
![]() |
![]() |
#43 |
![]() Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,384
|
![]()
Sweet! Another critical LT5 part well on the way to being solved!
THANK YOU PHIL!
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
![]() |
![]() |
![]() |
#44 |
![]() Join Date: Sep 2016
Location: Ocala, FL
Posts: 889
|
![]()
I am impressed and thankful for all the expertise and dedication for the sake of everyone that enjoys these cars. This is neat to see it come together. I hope you have good weather for testing.
Sent from my iPhone using ZR-1 Net Registry
__________________
Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much. |
![]() |
![]() |
![]() |
#45 |
![]() Join Date: Oct 2013
Location: Spokane Valley, WA
Posts: 115
|
![]()
Phil, Once again to the rescue of the LT5. Highly interested in the end result so I may replace the sensor in my LT5 while it's out of the car and prior to installing the cam covers.
Tony - Tnova |
![]() |
![]() |
![]() |
#46 |
![]() Join Date: Apr 2007
Location: Northern VA
Posts: 2,653
|
![]()
Installed the alternative camshaft position sensor on my 94 Z this afternoon and it performed perfectly during garage running tests. Even disconnected the signal wire which immediately triggered code 31 cam sensor failure. Reconnected and all was fine again. Rainy weather here prevented a more thorough road test however, from what I've seen thus far I'm confident it will perform just as well as the OEM sensor.
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
![]() |
![]() |
![]() |
#47 |
![]() Join Date: Sep 2016
Location: Ocala, FL
Posts: 889
|
![]()
__________________
Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much. |
![]() |
![]() |
![]() |
#48 | |
![]() Join Date: Apr 2007
Location: Northern VA
Posts: 2,653
|
![]() Quote:
Jeff, Thanks for the offer. In the meantime Dave got me straightened out on the Metri-pack connector components I needed which are now on order and should arrive by Wednesday. Sent from my iPhone using ZR-1 Net Registry
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
|
![]() |
![]() |
![]() |
#49 |
![]() Join Date: Aug 2006
Location: McLean, VA
Posts: 3,710
|
![]()
Fantastic job, Phil!
So, which model is this sensor originally listed for? Another GM model? |
![]() |
![]() |
![]() |
#50 |
![]() Join Date: Apr 2007
Location: Northern VA
Posts: 2,653
|
![]()
It’s an generic aftermarket piece I found with a form close enough for replacing the OEM sensor.
Modifications: • Machined spacer ring for adapting the sensor to the cylinder head mounting bore location. • Correct size O-ring • Machining O-ring groove • Fabing up cable plug end • Installing split wiring conduit
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake Last edited by Jagdpanzer; 12-24-2017 at 09:56 AM. |
![]() |
![]() |
![]() |
|
|