Fuel injector question - Page 4 - ZR-1 Net Registry Forums

-=Jeff=- · 05-17-2009

Quote:

Originally Posted by Kb7tif

I have been keeping track of your experience here. I know mine in the 92 will need replacing as when checking the spark plugs 1 plug was wet, due to a leaker. The car runs fine no backfire and idles smooth. I have a set of the NOS stainless that will go in-sometime-.

Yeah, nice day today but did a lot of outside work so no vette time.. I think all is good, but need to get some more miles on it

secondchance · 05-19-2009

Well???

-=Jeff=- · 05-19-2009

Quote:

Originally Posted by secondchance

Well???

Drove it yesterday to and from work

so far so good

Driving it to my club meeting tonight

I think all is good

Jon @ FIC is awesome to deal with

he said on my issues alone we had over 100 emails back and forth..

I would not hesitate to buy from there again

secondchance · 05-19-2009

My experience with Jon Banner was excellent also.
Also, it worried me that all gas around hear has ethanol added and it may have an adverse effect on Multecs. Now, I am worry free and loving it!

Glad all is well again.

zr1don · 05-19-2009

I have a 90 I replaced 16 injectors w/RC's. RC recommended their 19.5 lb injector (all 16 the same flow rate) and it runs great. I believe the stock multecs were rated at 21 lbs (again all 16) but RC recommended the 19.5's for a direct replacement.

secondchance · 05-19-2009

Quote:

Originally Posted by zr1don

I have a 90 I replaced 16 injectors w/RC's. RC recommended their 19.5 lb injector (all 16 the same flow rate) and it runs great. I believe the stock multecs were rated at 21 lbs (again all 16) but RC recommended the 19.5's for a direct replacement.

I believe you are right that factory was 21 lbs. FIC recommended 21 lbs as well.
Within reason, ECM will most likely adjust pulse rate based on O2 reading.

-=Jeff=- · 05-19-2009

Quote:

Originally Posted by secondchance

I believe you are right that factory was 21 lbs. FIC recommended 21 lbs as well.
Within reason, ECM will most likely adjust pulse rate based on O2 reading.

yeah sort of.. OEM are 214cc/mm FIC ( or min are 2210-230cc/mm

I will adjust my injector constant first and see if that helps..
I have not done that yet

jonszr1 · 05-19-2009

jeff could you give me jons email or send him mine .i need to get ahold of him . thanx . mine bradleyjontaylor@hotmail.com

secondchance · 05-20-2009

Jonszr1,

I PMed Jon Banner's phone numbers to you.

05-19-2009	#32
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,719	Re: Fuel injector question Well???

05-19-2009	#34
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,719	Re: Fuel injector question My experience with Jon Banner was excellent also. Also, it worried me that all gas around hear has ethanol added and it may have an adverse effect on Multecs. Now, I am worry free and loving it! Glad all is well again.

05-19-2009	#35
zr1don Join Date: Jan 2006 Location: Temecula, CA Posts: 88	Re: Fuel injector question I have a 90 I replaced 16 injectors w/RC's. RC recommended their 19.5 lb injector (all 16 the same flow rate) and it runs great. I believe the stock multecs were rated at 21 lbs (again all 16) but RC recommended the 19.5's for a direct replacement.

05-19-2009	#38
jonszr1 Join Date: Sep 2006 Location: lone pine and mammoth lakes Posts: 1,406	Re: Fuel injector question jeff could you give me jons email or send him mine .i need to get ahold of him . thanx . mine bradleyjontaylor@hotmail.com

05-20-2009	#39
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,719	Re: Fuel injector question Jonszr1, I PMed Jon Banner's phone numbers to you.