Fun winter project - Page 4 - ZR-1 Net Registry Forums

We Gone · 02-05-2014

Looks nice, were are you going to hide all the parts and wiring? Will you have to modify the bezel or inner frame work?

-=Jeff=- · 02-05-2014

Quote:

Originally Posted by We Gone

Looks nice, were are you going to hide all the parts and wiring? Will you have to modify the bezel or inner frame work?

I think the tuner will go on the passenger side near the antenna wire, well I am hoping anyway..

the PLD and Behringer should fit in the area where the radio was as that wil be spacious now..

the Bezel did have to be modified, but I already had a modded non-Z bezel that I am using and cleaning up.. the picture below shows the amount I had to modify to get the lower part of the screen to be shown and accessible,

So yes some mods are needed

A for mounting, it looks like I will be able to utilize the OEM mounting spots I just need to get that aligned and finished.

Also to note, since the Directed is connected Directly to the Behringer, there is no volume control from the tablet, so I bought one of these to be my master volume, just not sure where to mount it yet..

Schrade · 02-06-2014

Quote:

Originally Posted by We Gone

Looks nice, were are you going to hide all the parts and wiring? Will you have to modify the bezel or inner frame work?

My thoughts too; lotsa' hardware to conceal there...

-=Jeff=- · 02-06-2014

mount is almost ready, but I have it fit right

I do need a 90 degree USB for the connection and I should have enough space.

I am waiting for it to get here to try, meanwhile I will finish the mount and panel

-=Jeff=- · 02-06-2014

Not sure if this video like will work

https://drive.google.com/file/d/0B5W...it?usp=sharing

GOLDCYLON · 02-06-2014

-=JEFF=-is this fixed mount or dock able ?

-=Jeff=- · 02-06-2014

Quote:

Originally Posted by GOLDCYLON

-=JEFf=- is this fixed mount or dock able ?

this will be fixed mount.. it could be dockable, but the bezel would have a lot more mods to get it to work

GOLDCYLON · 02-06-2014

Quote:

Originally Posted by -=Jeff=-

this will be fixed mount.. it could be dockable, but the bezel would have a lot more mods to get it to work

I thought so my thoughts were to be able to remove it as to not give anybody an excuse to break in. Kind of discourages the "honest" lol

-=Jeff=- · 02-07-2014

Yeah GC I thought of that too. I have another panel I have cut up that I could make work for a removable solution and considered it, but even when I had the app radio I would had the same concern.. so I decided a permanent mount would be easier

-=Jeff=- · 02-09-2014

Custom tablet mount

I used a portion of a 360deg rotation case to mount the it. Then pop riveted brackets to it to mount on the stock radio mounting points.

I also received my power supply for everything. If it would warm up I can start installing at this stuff. I do need a USB extension cable though for a USB flash drive

02-05-2014	#31
We Gone Join Date: Apr 2004 Location: ATL. GA. Posts: 2,163	Re: Fun winter project Looks nice, were are you going to hide all the parts and wiring? Will you have to modify the bezel or inner frame work? __________________ Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold

02-06-2014	#34
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,144	Re: Fun winter project mount is almost ready, but I have it fit right I do need a 90 degree USB for the connection and I should have enough space. I am waiting for it to get here to try, meanwhile I will finish the mount and panel __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

02-06-2014	#35
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,144	Re: Fun winter project Not sure if this video like will work https://drive.google.com/file/d/0B5W...it?usp=sharing __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

02-06-2014	#36
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,153	Re: Fun winter project -=JEFF=-is this fixed mount or dock able ? __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 02-06-2014 at 11:08 PM.

02-07-2014	#39
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,144	Re: Fun winter project Yeah GC I thought of that too. I have another panel I have cut up that I could make work for a removable solution and considered it, but even when I had the app radio I would had the same concern.. so I decided a permanent mount would be easier __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

02-09-2014	#40
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,144	Re: Fun winter project Custom tablet mount I used a portion of a 360deg rotation case to mount the it. Then pop riveted brackets to it to mount on the stock radio mounting points. I also received my power supply for everything. If it would warm up I can start installing at this stuff. I do need a USB extension cable though for a USB flash drive __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978