CMHSL LED install on my ZR-1 - Page 4 - ZR-1 Net Registry Forums

ZZZZZR1 · 02-05-2010

Quote:

Originally Posted by 96LT4

I'll take that as a compliment.

How much were those tail lamps? I like!!!!!!!!

Where did you get them from?

Dynomite · 02-05-2010

Quote:

Originally Posted by GOLDCYLON

Yes they are flat. That pic was taken Pre-LEDs and is with Stock lenses that were indeed curved. The Billet frames never fit quite right because they are flat on the backside as well.

Now they fit much better

You mean like this

The billet chrome louvers look a lot better than I thought they would on red

The billet louvers fit perfect especially up against the flat lens of the LED tail lights.

pantera1683 · 11-11-2010

Goldcylon, can you repost the CHMSL pics?

GOLDCYLON · 11-11-2010

Quote:

Originally Posted by pantera1683

Goldcylon, can you repost the CHMSL pics?

Sorry long gone

GOLDCYLON · 12-02-2013

I abandoned the old LEDS because I wasn't happy with the results. they were not very bright and just looked like four separate bulbs in the CHMSL because LEDS did not reflect off the factory reflector like stock. So.... several years ago -=JEFF=- made me a custom unit. Its been running strong many years now. And.... better than stock. The pic above is the final result of this project

Schrade · 12-03-2013

Quote:

Originally Posted by GOLDCYLON

I abandoned the old LEDS because I wasn't happy with the results. they were not very bright and just looked like four separate bulbs in the CHMSL because LEDS did not reflect off the factory reflector like stock. So.... several years ago -=JEFF=- made me a custom unit. Its been running strong many years now. And.... better than stock. The pic above is the final result of this project

Need to see Jeff's custom unit...

I found some dis-continued Universal Fit LED's at Advance the other day for CHEAP, and thought there might be a way to integrate them into the front Driving Light harnesses...

GOLDCYLON · 12-03-2013

LEDS are indeed becoming cheaper as well as standard on most newer cars. I basically sent Jeff a Used CMSHL and he did the conversion for me which was plug and play. Result was brillant

11-11-2010	#33
pantera1683 Join Date: Mar 2010 Location: Fort Worth, TX Posts: 396	Re: CMHSL LED install on my ZR-1 Goldcylon, can you repost the CHMSL pics?

12-02-2013	#35
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: CMHSL LED install on my ZR-1 I abandoned the old LEDS because I wasn't happy with the results. they were not very bright and just looked like four separate bulbs in the CHMSL because LEDS did not reflect off the factory reflector like stock. So.... several years ago -=JEFF=- made me a custom unit. Its been running strong many years now. And.... better than stock. The pic above is the final result of this project __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

12-03-2013	#37
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: CMHSL LED install on my ZR-1 LEDS are indeed becoming cheaper as well as standard on most newer cars. I basically sent Jeff a Used CMSHL and he did the conversion for me which was plug and play. Result was brillant __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V